A horizontal board weighing 227.0 N is supported at points A and B. The plank is 3.8 m in length, and points A and B are sawhorse supports a distance of D in from each end of the plank. The plank serves as a platform for a painter, who weighs 553.0 N. Find the maximum distance D, such that the plank will not tip, no matter where the painter stands. (Let L = 3.80 m.)

  1. 👍 0
  2. 👎 0
  3. 👁 302

Respond to this Question

First Name

Your Response

Similar Questions

  1. physics

    A 5-kg crate is resting on a horizontal plank. The coeffi- cient of static friction is 0.5 and the coefficient of kinetic friction is 0.4. After one end of the plank is raised so the plank makes an angle of 25 with the

    asked by ashlee on January 20, 2013
  2. physics please help!!

    A diver stands on the end of a diving board as shown in the figure on the right. The mass of the diver is 58 kg and the mass of the uniform diving board is 35 kg. Calculate the magnitudes and directions of the forces exerted on

    asked by Bobby on March 24, 2014
  3. physics

    A 45.0 kg girl is standing on a 163 kg plank. The plank, originally at rest, is free to slide on a frozen lake, which is a flat, frictionless surface. The girl begins to walk along the plank at a constant velocity of 1.45 m/s

    asked by Elisa on July 7, 2008
  4. physics

    a machine weighing 1500N is supported bt two chains attached to some point on the of these ropes goes to the eye bolt in the well & is inclined 30 degrees to the horizontal & the other goes to the hook in ceiling & is

    asked by wilson on March 23, 2013
  5. Physics

    A person carries a plank of wood 2 m long with one hand pushing down on it at one end with a force F1 and the other hand holding it up at 50 cm from the end of the plank with force F2. If the plank has a mass of 20 kg and its

    asked by Amy on July 14, 2013
  1. physics

    A book of mass 7 kg rests on a plank. You tilt one end of the plank and slowly increase the angle of the tilt. The coefficient of static friction between the book and the plank is 0.40. What is the maximum angle of tilt for which

    asked by jill on September 24, 2014
  2. science

    A uniform plank of a seesaw is 5 meter long and supported at its centre.a boy weighing 40kgf sits at a distance 1.5meter from one end of the seesaw.where must a girl weighing 25kgf sit on the other end of the seesaw so as to

    asked by nitesh srivastava on April 28, 2015
  3. physics

    A construction supervisor of mass M = 83.7 kg is standing on a board of mass m = 30.5 kg. The board is supported by two saw horses that are a distance of 4.50 m apart. If the man stands a distance x1 = 1.30 m away from saw horse 1

    asked by rory on December 20, 2007
  4. physics rework (please help)

    A 160-N child sits on a light swing and is pulled back and held with a horizontal force of 100N. The tension force of each of the two supporting ropes is: A uniform plank is supported by two equal 120N forces at X and Y at both

    asked by Diane on December 10, 2006
  5. physics help

    Example 11-9 depicts the following scenario. A cat walks along a plank with mass M= 7.00 kg. The plank is supported by two sawhorses. The center of mass of the plank is a distance d1= 0.850 m to the left of sawhorse B. When the

    asked by sinti on May 9, 2017
  6. Civics

    1. What is the difference between a party’s platform and a plank? Select all that apply. (2 points) A.A plank is more general than the platform. B.A plank is more specific than the platform. C.A plank is a statement of a single

    asked by Manny on May 17, 2020

You can view more similar questions or ask a new question.