Engines
How do i find total displacement in in^3/min if i have the bore and stroke and and rpm and number of cylinder. i can calculate piston and engine displacement and compression ratios but just not sure about TOTAL displacement and the rpms?
asked by
Matt
Respond to this Question
Similar Questions

geometry
the bore of an engine cyclinder is the diameter of the piston and the stroke is the distance that the piston will travel up the cyclinder wall. The displacement is the volume of space that the piston goes thru. If the piston is 
engineering HELP
you've bought a new truck and want to show off your ag engineering skills by painting the bore, stroke, piston displacement, clearance volume, and compression ratio for the engine on the hood. All you know about the truck is that 
physics
Stuck on this homework problem, any help would be appreciated. Thank you!! A truck has 5.9L diesel engine in it. 5.9L of the overall displacement in 6 cylinders each 102mm bore (diameter) and 120mm stroke (length). Engine operates 
math
A fourcylinder engine has a bore of 90mm and a stroke of 100mm. The clearance volume of each cylinder is 0.065 L. Assuming compression starts at the bottom of the stroke, determine: (a) the capacity of the engine (b) the 
math
A truck has 5.9L engine in it. 5.9L of the overall displacement in 6 cylinders each 102mm bore (diameter) and 120mm stroke (length). Engine operates at 16.3:1 compression ratio and with 6psi (0.41atm) of boost cruising at 1600rpm. 
physics
A piston of a car engine executes a simple harmonic motion. the acceleration a of the piston is related to its displacement x by the equation: a = 6.4*10^5x a) Calculate the frequency of motion b) The piston has a mass of 700 gms 
Chemistry
A truck has 5.9L diesel engine in it. 5.9L of the overall displacement in 6 cylinders each 102mm bore (diameter) and 120mm stroke (length). Engine operates at 16.3:1 compression ratio and with 6psi (0.41atm) of boost cruising at 
physics
A reciprocating compressor is a device that compresses air by a backandforth straightline motion, like a piston in a cylinder. Consider a reciprocating compressor running at 150 rpm. During a compression stroke, 1.30 mol of air 
Math
The position of a car piston within the cylinder is described by the equation: y = S sin(360 r t  90 Where S is the stroke length of the cylinder, r is the rpm of the crank shaft, and t is the time in minutes. If the stroke 
physics
Find the resulting displacement of a 15km displacement and a 25km displacement when the angle between them is 90 degrees.( Your answer should include magnitude and direction of the displacement.)