# physics

A uniform bar of length 12 m and mass 3 kg is attached to a wall with a hinge that exerts a horizontal force Hx and a vertiscal force Hy on the bar. The bar is held by a cord that makes a 90 degree angle with respect to bar and 43 degrees with respect to wall. What is the magnitude of the horizontal force Hx on the pivot? The acceleration of gravity is 9.8 m/s^2. Answer in units of N.

Thanks!

1. 👍
2. 👎
3. 👁
1. HELLLPPPPP!

1. 👍
2. 👎
2. LOL. I got the same problem, I really can't find any answer or solution for it.

1. 👍
2. 👎

1. 👍
2. 👎

## Similar Questions

1. ### Physics

A horizontal uniform bar of mass 2.6kg and length 3.0m is hung horizontally on two vertical strings. String 1 is attached to the end of the bar, and string 2 is attached a distance 0.65m from the other end. A monkey of mass 1.3kg

2. ### physics

A string is wrapped around a uniform disk of mass M = 1.6 kg and radius R = 0.10 m. (Recall that the moment of inertia of a uniform disk is (1/2)MR2.) Attached to the disk are four low-mass rods of radius b = 0.17 m, each with a

3. ### Physics

A uniform beam of length 1.0 m and mass 16 kg is attached to a wall by a cable that makes an angle of 30 degrees with the end of the beam, as shown in the figure. The beam is free to pivot at the point where it attaches to the

4. ### Physics

A uniform bar length of 2.0m and weight 1000 N has its center of gravity at its center. The bar is pivoted 0.5m from the right, and supports a weight of 200N on the opposite end (left end). What is the weight needed at right end

1. ### Physics

A small 0.13 g bug stands at one end of a thin uniform bar that is initially at rest on a smooth horizontal table. The other end of the bar pivots about a nail driven into the table and can rotate freely, without friction. The bar

2. ### physics

A uniform horizontal beam with a length of 8m and a weight of 200N is attached to a wall by a pin connection. Its far end is supported by a cable that makes an angle of 53° with the beam (Figure below). If a 600N person stands 2m

3. ### physics

a 10.0m long bar is attached by a frictionless hing to a wall and held horizontally by a rope that makes an angle of 53 deg with the bar the bar is uniform and weights 39.9 N. how far from the hinge should a 10.0kg mass be

4. ### Physics

The figure (Figure 1) shows a model of a crane that may be mounted on a truck.A rigid uniform horizontal bar of mass m1 = 80.0 kg and length L = 5.30 m is supported by two vertical massless strings. String A is attached at a

1. ### Physics

A solid bar of length L = 1.32 m has a mass m1 = 0.751 kg. The bar is fastened by a pivot at one end to a wall which is at an angle θ = 35.0 ° with respect to the horizontal. (in other words, the angle between the wall and the

2. ### physics

In Fig. 12-51, uniform beams A and B are attached to a wall with hinges and loosely bolted together. Beam A has length LA = 2.55 m and mass 49.0 kg; beam B has mass 69.0 kg. The two hinge points are separated by distance d = 1.86

3. ### physics

A weight (with a mass of 71 kg) is suspended from a point near the right-hand end of a uniform boom with a mass of 51 kg . To support the uniform boom a cable runs from this same point to a wall (the left-hand vertical coordinate

4. ### Engineering

A 50 lb bar rotates clockwise 2 rad/s. The spring attached to its end always remains vertical due to the roller guide at C. If the spring has an unstretched length of 2 ft and a stiffness of k=6lb/ft, determine the angular