Physical Science

How much work is done by a crane that lowers 1000 N of material at a distance of 150 m?

  1. 👍 0
  2. 👎 0
  3. 👁 166
  1. two tuning forks are struck at the same time one turning fork has a frequency of 20 Hz the second turning fork has a frequency off 226 Hz how may beats will result

    1. 👍 0
    2. 👎 0
  2. Lol

    1. 👍 0
    2. 👎 0

Respond to this Question

First Name

Your Response

Similar Questions

  1. physics

    Suppose the ski patrol lowers a rescue sled and victim, having a total mass of 95.0 kg, down a θ = 50.0° slope at constant speed. The coefficient of friction between the sled and the snow is 0.100. (a) How much work is done by

    asked by Karina on July 9, 2015
  2. Physics

    A crane lifts a 425-kg steel beam vertically upward a distance of 95 m. How much work (in kJ) does gravity do on the beam if the beam accelerates upward at 1.8 m/s2? Neglect frictional forces. Give your answer to 3 significant

    asked by AVIRO on June 4, 2020
  3. Physics

    Fig.19 shows a crane lifting a car of mass 850 kg at constant velocity through a height of 12m in a time of 40s. The crane has a working efficiency of 60%. i) Calculate the tension in the lifting cable (in N) ii) Calculate the

    asked by cake on November 14, 2017
  4. Intro to Physics

    A sample of an unknown material appears to weigh 295 N in air and 165 N when immersed in alcohol of specific gravity 0.700. (a) What is the volume of the material? ___________m^3 (b) What is the density of the material?

    asked by Amy on November 7, 2012
  5. Physics

    A crane lifts an 425-kg object vertically upward a distance of 95 m. How much work (in kJ) does the crane do on object if object accelerates upward at 1.8 m/s2? Neglect frictional forces. How much work (in kJ) does gravity do on

    asked by AVIRO on June 5, 2020
  1. Physics: Buoyancy

    A crane lifts the 23000 kg steel hull of a ship out of the water. Determine the following. (a) the tension in the crane's cable when the hull is submerged in the water

    asked by Seth on January 27, 2013
  2. Physics

    The boom of a crane is 20 m long and is inclined 20ᵒ from the horizontal. A bucket of cement with a mass of 3000 kg is suspended from the upper end of the boom. What is the torque acting on the point where the boom is attached

    asked by Tom on November 13, 2012
  3. English

    1. All of the following lines from "Cranes" demonstrate the story's message about the effects of war on people except. A. "The northern village at the border of the Thirty-eighth Parallel was snugly settled under the high, bright

    asked by Crystals on May 10, 2017
  4. Physics

    One of the most powerful cranes in the world, operating in Switzerland, can slowly raise a load of 6000 tonne to a height of 12 m. (1 tonne = 1000 kg) The acceleration of gravity is 9.81 m/s2 . How much work is done by the crane?

    asked by Danny on February 26, 2013
  5. algebra (check answer)

    The diameter of a valve for the space shuttle must be within 0.001 mm of 5 mm. Write and solve an absolute-value equation to find the boundary values for the acceptable diameters of the valve. | d - 5.000| = 0.001 d - 5 = 0.001 d

    asked by buttercup on August 30, 2016
  6. Phsyics

    In a shipping yard, a crane operator attaches a cable to a 1130-kg shipping container and then uses the crane to lift the container vertically at a constant velocity for a distance of 30 m. Determine the amount of work done by

    asked by ANdy on March 26, 2014

You can view more similar questions or ask a new question.