Physics

Alcohol flows smoothly through a horizontal pipe that tapers in cross-sectional area from A1 = 41.9 cm2 to A2= A1/3. The pressure difference Δp between the wide and the narrow sections of the pipe is 11.1 kPa. What is the volume flow rate ΔV/Δt of the alcohol? The density of the alcohol is ρ = 838 kg/m3. Hint: Treat as an ideal fluid. You will need both the conservation of mass properties and the conservation of energy properties.

  1. 👍 0
  2. 👎 0
  3. 👁 164

Respond to this Question

First Name

Your Response

Similar Questions

  1. Math

    The area of cross section of a pipe is 5.4 centimetres square and the water pump out of it at the rate of 27 kilometre per hour find the volume of water which flows out of the pipe in 1 minute

    asked by Rayan patel on January 10, 2017
  2. physics

    1.) Water flows from a 2 cm diameter pipe, at a speed of 0.35m/sec. How long will it take to fill a 10 liter container? 2.) A horizontal segment of pipe tapers from a cross-sectional area of 50 cm^2 to 0.5 cm? The pressure at the

    asked by Akitsuke on November 22, 2008
  3. physics

    A horizontal pipe has a cross sectional area of 40.0 cm^2 at the wider portions and 10.0 cm^2 at the constriction. Water is flowing in the pipe, and the discharge from the pipe is 6.00*10^-3 m^3/s(6.00 L/s). Find (a) the flow

    asked by Jen on November 13, 2007
  4. physics ---- really dnt get this at all

    A total charge of 25 mC passes through a cross-sectional area of a nichrome wire in 10 s. How many electrons pass through the cross-sectional area in 16 s? Choose one answer. a. 2.5 x 1017 electrons b. 2.5 x 1019 electrons c. 2.5

    asked by ashley --- HELP PLEASEE!!! on May 31, 2011
  5. physics

    1. A closed magnetic circuit of cast steel contains a 6cm long path of cross sectional area 1cm square and a 2cm part of cross sectional area of 0.5cm square. A coil of 200 turns is wound around the 6cm length of the circuit and a

    asked by Joanna on April 18, 2012
  1. Physics

    A liquid (density = 1.65 g/cm^3) flows through two horizontal sections of tubing. In the first section the cross-sectional area is 10.0 cm^2, the flow speed is 275 cm/s, and the pressure is 1.20 x 10^5 Pa. This tubing then rises

    asked by Daniel on November 11, 2010
  2. physics

    a fluid flows through a horizontal pipe of varying cross-section. Assuming the flow is streamline and applying the bernoulli equation, show that pressure in the pipe is greatest where cross-sectional area is greatest.

    asked by Edwin on March 28, 2010
  3. Physics

    Alcohol flows smoothly through a horizontal pipe that tapers in cross-sectional area from A1 = 41.9 cm2 to A2= A1/3. The pressure difference Äp between the wide and the narrow sections of the pipe is 11.1 kPa. What is the volume

    asked by Rebecca on December 2, 2009
  4. Physics

    Water is flowing in a pipe with a varying cross-section area, and at all points the water completely fills the pipe. At point 1 the cross-section area of the pipe is 0.080 m^2, and the magnitude of the fluid velocity is 2.50m/s.

    asked by Lycra on May 10, 2012
  5. physics

    Water flows through a 4.0-cm-diameter horizontal pipe at a speed of 1.3m/s . The pipe then narrows down to a diameter of 2.0cm . Ignoring viscosity, what is the pressure difference between the wide and narrow sections of the pipe?

    asked by Dr.B on March 23, 2018
  6. physics

    1.)Water flows from a 2 cm diameter pipe, at a speed of 0.35m/sec. How long will it take to fill a 10 liter container? 2.)A horizontal segment of pipe tapers from a cross-sectional area of 50 cm^2 to 0.5 cm^2. The pressure at the

    asked by slayer on November 23, 2008

You can view more similar questions or ask a new question.