Physics!

A wheel rotates with a constant angular acceleration of 3.50 rad/s2. The angular speed of the wheel is 2.00 rad/s at t = 0. If the radius of the wheel is doubled, Are the following statements affected? If so, in what way? (Select all that apply.)

(1)The angular speed at t = 2.00 s is the same.
(2) The angle rotated through from t = 0 to t = 2.00 s is smaller.
(3) The angle rotated through from t = 0 to t = 2.00 s is the same.
(4) The angular speed at t = 2.00 s is greater.
(5)The angle rotated through from t = 0 to t = 2.00 s is greater.
(6)The angular speed at t = 2.00 s is smaller.

--------------------
i think its (4) and (5) but i have no clue...
Thank You

  1. 👍
  2. 👎
  3. 👁
  1. I figured it out!!
    It was (1) and (3)
    Never mind!

    1. 👍
    2. 👎
  2. Yes, 1 and 3.

    1. 👍
    2. 👎

Respond to this Question

First Name

Your Response

Similar Questions

  1. physics

    A 4.50-kg wheel that is 34.5 cm in diameter rotates through an angle of 13.8 rad as it slows down uniformly from 22.0 rad/s to 13.5 rad/s. What is the magnitude of the angular acceleration of the wheel? A) 0.616 rad/s 2 B) 22.5

  2. Physics

    Starting from rest, a wheel undergoes constant angular acceleration for a period of time T. At what time after the start of rotation does the wheel reach an angular speed equal to its average angular speed for this interval?

  3. Physics 1 (Calc Based)

    At t = 0, a wheel rotating about a fixed axis at a constant angular acceleration of –0.40 rad/s^2 has an angular velocity of 1.5 rad/s and an angular position of 2.3 rad. What is the angular position of the wheel at t = 2.0 s?

  4. physics

    A wind turbine is initially spinning at a constant angular speed. As the wind's strength gradually increases, the turbine experiences a constant angular acceleration 0.170 rad/s2. After making 2870 revolutions, its angular speed

  1. Physics Really Need Help Please

    At time t=0 a grinding wheel has an angular velocity of 26.0 rad/s. It has a constant angular acceleration of 25.0 rad/s^2 until a circuit breaker trips at time t = 2.50 s. From then on, the wheel turns through an angle of 440 rad

  2. physics

    A wheel starts from rest and rotates with constant angular acceleration and reaches an angular speed of 12.0 rad/s in 3.00 s. Find the angle (in radians) throuh which it rotates in this time.

  3. Physics

    Starting from rest, a disk rotates about its central axis with constant angular acceleration. In 6.00 s, it rotates 28.0 rad. During that time, what are the magnitudes of (a) the angular acceleration and (b) the average angular

  4. physics

    As a result of friction, the angular speed of a wheel changes with time according to d(theta)/dt = w0 e^-(aplpha*t) where w0 and alpha are constants. The angular speed changes from an initial angular speed of 4.87 rad/s to 4.27

  1. physics

    a remote controlled car's wheel accelerates at 22.4 rad/s^2. if the wheel begins with an angular speed of 10.8 rad/s what is the wheel's angular speed after exactly 3 full turns?

  2. physics

    A centrifuge in a medical laboratory rotates at an angular speed of 3,550 rev/min. When switched off, it rotates through 54.0 revolutions before coming to rest. Find the constant angular acceleration (in rad/s2) of the centrifuge.

  3. Physics

    A grindstone of radius 4.0m is initially spinning with an angular speed of 8.0 rad/s. The angular speed is then increased to 12 rad/s over 4.0s. Assume that the angular acceleration is constant. What is the average angular speed

  4. Physics

    At t = 0, a wheel rotating about a fixed axis at a constant angular acceleration of –0.40 rad/s^2 has an angular velocity of 1.5 rad/s and an angular position of 2.3 rad. What is the angular position of the wheel at t = 2.0 s?

You can view more similar questions or ask a new question.