Please check solution

A uniform solid disk with a mass of 40.3 kg and a radius of 0.454 m is free to rotate about a frictionless axle. Forces of 90.0 N and 125 N are applied to the disk

(a) What is the net torque produced by the two forces? (Assume counterclockwise is the positive direction

(b) What is the angular acceleration of the disk?

This is how i solved it.

Torque = Fl
net torque = (125N x 0.454m) + (90N x 0.454N)=97.81

Angular acceleration = torque/ inertia

Inertia = mass x radius ^2
= 40.3 kg x 0.454 ^2 =8.31

Angular acceleration = 97.81/ 8.31 =11.77 rads/s^2

Please check solution

Isnt the moment of inertia 1/2 m r^2 ?

So Moment of Inertia = 0.5x 40.3kg x 0.454^2 = 4.15

Angular acceleration =97.81/4.15
=23.55

  1. 👍
  2. 👎
  3. 👁
  4. ℹ️
  5. 🚩

Respond to this Question

First Name

Your Response

Similar Questions

  1. Physics

    A 190-kg merry-go-round in the shape of a uniform, solid, horizontal disk of radius 1.50 m is set in motion by wrapping a rope about the rim of the disk and pulling on the rope. What constant force would have to be exerted on the

  2. physics concepts (please check over my work)

    A uniform cyclinder made of lead has the same mass and the same length as a uniform solid cylinder made of wood. The rotatonal inertia of the lead cylinder compared to the wooden one is: I thought at first that the rotational

  3. Need help at this very minute with physics

    In Figure 10-53, two blocks, of mass m1 =400 g and m2 =600 g, are connected by a massless cord that is wrapped around a uniform disk of mass M = 500 g and radius R = 12.0 cm. The disk can rotate without friction about a fixed

  4. Physics

    Figure 10-42 shows a uniform disk that can rotate around its center like a merry-go-round. The disk has a radius of 2.00 cm and a mass of 20.0 grams and is initially at rest. Starting at time t = 0, two forces are to be applied

  1. Physics

    A uniform solid disk of radius 1.7 m and mass 81.3 kg is free to rotate on a frictionless pivot through a point on its rim. If the disk is released from rest in the position shown by the solid circle, what is the speed of its

  2. physics

    A curcial part of a piece of machinery starts as a flat uniform cylindrical disk of radius R0 and mass M. It then has a circular hole of radius R1 drilled into it. The hole's center is a distance h from the center of the disk.

  3. physics

    A torque of 12 N ∙ m is applied to a solid, uniform disk of radius If the disk accelerates at what is the mass of the disk?

  4. Physics

    A solid cylindrical disk has a radius of 0.18 m. It is mounted to an axle that is perpendicular to the circular end of the disk at its center. When a 40-N force is applied tangentially to the disk, perpendicular to the radius, the

  1. Physics

    A uniform disk with mass 6 kg and radius 1.8 m is pivoted at its center about a horizontal, frictionless axle that is stationary. The disk is initially at rest, and then a constant force 31.5N is applied to the rim of the disk.

  2. Physics

    A steady horizontal force F if magnitude 21N is apllied at the axle of a solid disk. the disk has mass 2.0kg and diameter of 0.10m. What is the linear speed of the center of the disk after it has moved 12m?

  3. physics

    A solid cylindrical disk has a radius of 0.16 m. It is mounted to an axle that is perpendicular to the circular end of the disk at its center. When a 50 N force is applied tangentially to the disk, perpendicular to the radius, the

  4. Physics

    A solid disk rotates in the horizontal plane at an angular velocity of 0.0684 rad/s with respect to an axis perpendicular to the disk at its center. The moment of inertia of the disk is 0.190 kg·m2. From above, sand is dropped

View more similar questions or ask a new question.