Physics

A simple wheel and axle is used to lift a bucket of water from a well the radii of the wheel and axle are 20cm and 4cm respectively determine the theoretical effort required to lift a load of 30N assuming no energy losses

  1. 👍 2
  2. 👎 0
  3. 👁 57

Respond to this Question

First Name

Your Response

Similar Questions

  1. Physics

    A 5.2 kg bucket of water is raised from a well by a rope. The acceleration of gravity is 9.81 m/s^2.If the upward acceleration of the bucket is 4.0 m/s^2, find the force exerted by the rope on the bucket of water. Answer in units

    asked by Kenneth on January 7, 2016
  2. physics

    a rope is tied to a bucket of water, and the bucket is swung in a vertical circle of radius 1.2m. what must be the minimum speed of the bucket at the highest point of the circle if the water is to stay in the bucket throughtout

    asked by milo on January 8, 2016
  3. Physics

    You raise a bucket of water from the bottom of a well that is 12 m deep. The mass of the bucket and the water is 5.00 kg, and it takes 15 s to raise the bucket to the top of the well. How much power is required? Pe= 60.00 Work=

    asked by Haylee on January 22, 2015
  4. Physics

    Simple Machines A simple wheel and axle has a wheel diameter of 2.3m and an axle diameter of 92mm. If an effort of 26N is required to raise a mass of 16 kg what is the efficiency of the machine? A- 2.46% B- 95.3% C- 24.1% D- 20.1%

    asked by Danny on May 11, 2013
  5. PHYSICS

    AN AUTOMOBILE TIRE HAS A RADIUS OF 0.330M AND ITS CENTER MOVES FORWARD WITH A LINEAR SPEED OF V= 15.0M/S. a) DETERMINE THE ANGULAR SPEED OF THE WHEEL. B) RELATIVE TO THE AXLE, WHAT IS THE TANGENTIAL SPEED OF A POINT LOCATED 0.175M

    asked by kassy on November 8, 2016
  1. science

    a river does 6500J of work on a water wheel every second.The wheels efficiency is 12 percent.A)How much work in joules can the axle of the wheel do in a second? B)What is the power output of the wheel?

    asked by kayla on March 3, 2013
  2. physics

    A large wooden wheel of radius R and the moment of inertia I is mounted on an axle so as to rotate freely. A bullet of mass m and speed v is shot tangential to the wheel and strike its edge, lodging in the wheel’s rim. If the

    asked by Gee on December 4, 2010
  3. Physics

    A stiff uniform wire of mass M_0 and length L_0 is cut, bent, and the parts soldered together so that it forms a circular wheel having four identical spokes coming out from the center. None of the wire is wasted, and you can

    asked by Joe on April 5, 2012
  4. Math

    A bucket that weighs 3.2 pounds and a rope of negligible weight are used to draw water from a well that is 82 feet deep. The bucket is filled with 42 pounds of water and is pulled up at a rate of 2.3 feet per second, but water

    asked by Nancy on February 6, 2011
  5. college

    A typical ten-pound car wheel has a moment of inertia of about 0.35 kg*m^2. The wheel rotates about the axle at a constant angular speed making 45.0 full revolutions in a time interval of 7.00 sec . What is the rotational kinetic

    asked by Anonymous on October 25, 2009
  6. Physics 141

    A bicycle wheel resting against a small step whose height is h = 0.125 m. The weight and radius of the wheel are W = 23.1 N and r = 0.330 m, respectively. A horizontal force vector F is applied to the axle of the wheel. As the

    asked by dakota22 on April 5, 2014

You can view more similar questions or ask a new question.