Physics

Water, with a density of ρ=1180 kg/m3, flows in a horizontal pipe. In one segment of the pipe, the flow speed is v1=7.73 m/s. In a second segment, the flow speed is v2=3.77 m/s. What is the difference between the pressure in the second segment (P2) and the pressure in the first segment (P1)?

  1. 👍
  2. 👎
  3. 👁
  1. P1-P2=1/2 *1180*(V2^2-v1)^2
    differance in pressure=590(3.77^2-7.73^2) pascal

    1. 👍
    2. 👎
    👤
    bobpursley

Respond to this Question

First Name

Your Response

Similar Questions

  1. Physics

    Water flows into a house at a velocity of 15 m/s through a pipe that has a radius of 0.40 m. The water then flows through a smaller pipe at a velocity of 45 m/s. What is the radius of the smaller pipe?

  2. Physics

    Please someone help..A horizontal pipe 10.0cm in diameter has a smooth reduction to a pipe 5.0cm in diameter. If the pressure of the water in the large pipe is 80000Pa and the pressure in the small pipe is 60000Pa at what rate

  3. Physic

    1. Water at a pressure of 3.00 x 10 5th Pa flows through a horizontal pipe at a speed of 1.00 m/s. The pipe narrows to one-fourth its original diameter. What is the speed of the flow in the narrow section? Not sure was

  4. Physics

    Water flows at a speed of 15 m/s through a pipe that has a radius of 0.40 m. The water then flows through a smaller pipe at a speed of 45 m/s. What is the radius of the smaller pipe?

  1. physics, buoyance

    Water flows at a rate of 25L/min through a horizontal 8.0-cm-diameter pipe under a pressure of 5.7Pa . At one point, calcium deposits reduce the cross-sectional area of the pipe to 40cm2 . Part A What is the pressure at this

  2. Math

    The area of cross section of a pipe is 5.4 centimetres square and the water pump out of it at the rate of 27 kilometre per hour find the volume of water which flows out of the pipe in 1 minute

  3. Physics

    A horizontal segment of pipe tapers from a cross sectional area of 50.0 cm^ 2 to 0.500 cm^2. The pressure at the larger end of the pipe is 1.20x 10^5 Pa, and the speed is 0.040 m/s. what is the pressure at the narrow end of the

  4. Physics

    Water flows at 12 m/s in a horizontal pipe with a pressure of 3.0 x 10 4 N/m2 . If the pipe widens to twice its original radius, what is the pressure in the wider section?

  1. Physics

    Water (density = 1.0 × 103 kg/m3) flows through a horizontal tapered pipe. At the wide end its speed is 4.0m/s and at the narrow end it is 5.0 m/s. The difference is pressure between the two ends is:

  2. physics

    A liquid of density 1354 kg/m^3 flows with speed 2.45 m/s into a pipe of diameter 0.29 m. The diameter of the pipe decreases to 0.05 m at its exit end. The exit end of the pipe is 7.82 m lower than the entrance of the pipe, and

  3. physics

    1.) Water flows from a 2 cm diameter pipe, at a speed of 0.35m/sec. How long will it take to fill a 10 liter container? 2.) A horizontal segment of pipe tapers from a cross-sectional area of 50 cm^2 to 0.5 cm? The pressure at the

  4. Physics

    The water flowing through a 1.9 cm (inside diameter) pipe flows out through three 1.3 cm pipes. (a) If the flow rates in the three smaller pipes are 24, 18, and 13 L/min, what is the flow rate in the 1.9 cm pipe? (b) What is the

You can view more similar questions or ask a new question.