physics

What is the work done by a crane to lift a 500kg beam over a height of 50.0m? Assume the crane lifts the beam at a constant velocity.

  1. 👍 0
  2. 👎 0
  3. 👁 855
  1. work = force * distance

    1. 👍 0
    2. 👎 0
  2. remember weight = force up = m g

    1. 👍 1
    2. 👎 0
  3. 78

    1. 👍 0
    2. 👎 0

Respond to this Question

First Name

Your Response

Similar Questions

  1. calculus

    A rectangular beam is cut from a cylindrical log of radius 25 cm. The strength of a beam of width w and height h is proportional to wh2. (See Figure 4.70.) Find the width and height of the beam of maximum strength.

  2. Physics

    A 4.00-m-long, 500 kg steel beam extends horizontally from the point where it has been bolted to the framework of a new building under construction. A 70.0 kg construction worker stands at the far end of the beam. What is the

  3. math

    A rectangular beam is cut from a cylindrical log of radius 15 cm. The strength of a beam of width w and height h is proportional to wh^2. Find the width and height of the beam of maximum strength. (Round your answers to two

  4. Calculus

    A rectangular beam is cut from a cylindrical log of radius 30 cm. The strength of a beam of width w and height h is proportional to wh^2. Find the width and height of the beam of maximum strength. Is the width 45 and the height

  1. Physics

    A crane lifts a 425-kg steel beam vertically upward a distance of 95 m. How much work (in kJ) does gravity do on the beam if the beam accelerates upward at 1.8 m/s2? Neglect frictional forces. Give your answer to 3 significant

  2. physics

    An initially stationary 15.0-kg crate of cheese wheels is pulled via a cable a distance d= 5.70m up a frictionless ramp to a height of h= 2.50m, where it stops. What is the potential energy of the crate after it is lifted? How

  3. Physics

    A purple beam is hinged to a wall to hold up a blue sign. The beam has a mass of mb = 6.7 kg and the sign has a mass of ms = 17.4 kg. The length of the beam is L = 2.83 m. The sign is attached at the very end of the beam, but the

  4. physics

    a magnetic crane left a mass 1500 through a vertical height of 40m.calculate the work done in operating the crane

  1. Physics

    Early one October, you go to a pumpkin patch to select your Halloween pumpkin. You lift the 2.8 kg pumpkin to a height of 1.4 m, then carry it 50.0 m (on level ground) to the check-out stand. Calculate the work you do on the

  2. physics

    A purple beam is hinged to a wall to hold up a blue sign. The beam has a mass of mb = 6.9 kg and the sign has a mass of ms = 15.3 kg. The length of the beam is L = 2.55 m. The sign is attached at the very end of the beam, but the

  3. physics

    A 25 ft long crane supported at its lower end by a pin is elevated by a horizontal cable. A 250 lb load is suspended from the outer end of the crane. The center of gravity of the crane is 10 ft from the pin and the crane weighs

  4. physics

    the problem reads this "A person with mass m1 = 62 kg stands at the left end of a uniform beam with mass m2 = 93 kg and a length L = 3.5 m. Another person with mass m3 = 65 kg stands on the far right end of the beam and holds a

You can view more similar questions or ask a new question.