physics

A moto of a crane is lifting a 100 kg load 20m high using 25 kj of electrical energy. calculate the efficiency

1. 👍 0
2. 👎 0
3. 👁 104
1. eff= powerout/powerin * 100

1. 👍 0
2. 👎 0

Similar Questions

1. science physics

A giant crane in Washington DC was tested by lifting a 2.232x10^6 kg load. Find the magnitude of the force needed to lift the load with a net acceleration of 0m/s^2

asked by Melina on December 8, 2010
2. science physics

A giant crane in Washington DC was tested by lifting a 2.232x10^6 kg load. Find the magnitude of the force needed to lift the load with a net acceleration of 0m/s^2

asked by Melina on December 8, 2010
3. physics

a giant crane was tested by lifting 2.232*10^6 kg load.find the magnitude of the force needed to lift the load with a net acceleration of 0m/s^2. if the same force is applied to pull the load up a smooth slope that makes 30

asked by bandit on December 17, 2009
4. physics

a giant crane was tested by lifting 2.232*10^6 kg load.find the magnitude of the force needed to lift the load with a net acceleration of 0m/s^2. if the same force is applied to pull the load up a smooth slope that makes 30

asked by bandit on December 17, 2009
5. Physics

The arm of a crane at a construction site is 13.1 m long, and it makes an angle of 20° with the horizontal. Assume that the maximum load the crane can handle is limited by the amount of torque the load produces at the base of the

asked by Krista on March 21, 2011
6. math

a overhead gantry crane that is equiped whith a crane and hook block and reeved with 6 parts of line is lifting 12 tons what is the load on the haul line A.2000lbs B.6000lbs C.8000lbs D.4000lbs please show the formula

asked by jamie on September 27, 2010
7. Physics

Fig.19 shows a crane lifting a car of mass 850 kg at constant velocity through a height of 12m in a time of 40s. The crane has a working efficiency of 60%. i) Calculate the tension in the lifting cable (in N) ii) Calculate the

asked by cake on November 14, 2017
8. Physics

After an unfortunate accident at a local warehouse you have been contracted to determine the cause. A jib crane collapsed and injured a worker. The horizontal steel beam had a mass of 88.50 kg per meter of length and the tension

asked by Morgan on November 15, 2011
9. Cranes

08/09/2005 Physics A crane is lifting a 200 pound object. The crane boom is 50 ft long. The boom forms an 85 degree angle with the horizontal. What is the torque applied to the crane boom?

asked by Jerry on October 23, 2011
10. Physics

crane lifts a 75 kg girder 8.85 m. How much work does the crane do lifting with an upward acceleration of 1.20 m/s ^2?

asked by tionne on November 13, 2012

More Similar Questions