Physics

A wire of 5.0m and diameter 2.0mm,extends by 0.25mm when a force of 50N was stretch it from it's end calculate
a.the stress on the wire. b.the strain in the wire. c.the young's modulus of elasticity of the wire

  1. 👍 2
  2. 👎 1
  3. 👁 910
  1. L = 5
    d = 2*10^-3
    r = 10^-3
    A = pi r^2 = pi (10^-6)

    stress = 50 N / 3.14*10^-6 = 15.9 * 10^6 Newtons/ m^2
    strain = delta L/L = .25*10^-3 / 5 = .05 *10^-3 = 50 * 10^-6 m

    E = stress / strain

    1. 👍 2
    2. 👎 3
  2. Tanks a lot

    1. 👍 0
    2. 👎 1
  3. A wire of 5.0m and diameter 2.0mm,extends by 0.25mm when a force of 50N was stretch it from it's end calculate
    a.the stress on the wire. b.the strain in the wire. c.the young's modulus of elasticity of the wire

    1. 👍 0
    2. 👎 1

Respond to this Question

First Name

Your Response

Similar Questions

  1. Physics

    The force required to stretch a spring varies directly with the amount the spring is stretched. A force of 29 pounds is needed to stretch a spring 39 inches. How much force is required to stretch the spring 27 inches? Answer in

  2. Physics

    1. A force of 40N at the end of a wire of length 4m and diameter 2mm process and extension of 0.24mm. Calculate; (a) stress on the wire (b) strain in the wire (c) Young's Modulous for the material of the wire (π=3.14)

  3. physics

    A thin, light wire 75.8cm long having a circular cross section 0.560mm in diameter has a 25.5kg weight attached to it, causing it to stretch by 1.12mm . what is the stress?

  4. physics

    A force of 40N is applied at the end of a wire 4m long and produces an extension of 0.24mm. If the diameter of the wire is 2.00mm calculate the stress on the wire and strain in the wire. With full workings please

  1. Physics

    A force of 40N stretches a wire through 3cm,what force will stretch it through 5cm and through what length will a force of 100N stretch it? What assumption have you made?

  2. Physics

    A 550 turn solenoid is 15 cm long. The current in it is 33 A. A 3.0 cm long straight wire cuts through the center of the solenoid, along a diameter. This wire carries a 22 A current downward( and is connected by other wires that

  3. Physics

    A wire of length 5.0 m and diameter 2.0 mm extends by 0.25 mm when a force of 50 N was used to stretch it from its end. Calculate the (a)stress on the wire (b)strain in the wire

  4. physics

    A light rigid bar is suspended horizontally from two vertical wires, one of steel and one of brass. Each wire is 2.00m long. The diameter of the steel wire is 0.60mm and the length of the bar AB is 0.20m. When a mass of 10.0kg is

  1. physics

    An elastic string of length 20cm extends to 24cm. When it supports a weight of 50N, the energy stored in the string is

  2. Physics, please help

    Copper has a breaking stress of about 3 × 10^8 N/m2. What is the maximum load that can be hung from a copper wire of diameter 0.5 mm? Answer in units of N. If 55% of this maximum load is hung from the copper wire, by what

  3. Physics

    A wire length 2m and radius 1mm is stretched by 25mm on application of a force of 1000N.Calculate the young modulus

  4. physics

    A light rigid bar is suspended horizontally from two vertical wires, one of steel and one of brass. Each wire is 2.00m long. The diameter of the steel wire is 0.60mm and the length of the bar AB is 0.20m. When a mass of 10.0kg is

You can view more similar questions or ask a new question.