Physics

For what combination of parallel and series resistors will resistors of 25 ohms, 100 ohms, 50 ohms, and 50 ohms have a total resistance of 62.5 ohms?

  1. 👍
  2. 👎
  3. 👁

Respond to this Question

First Name

Your Response

Similar Questions

  1. physics (please check)

    A total resistance of 3 ohms is to be producd by combining an unknown resistor R with a 12 ohm resistor. What is the value of R and how is it connected to the 12 ohm resistor a) 4.0 ohm parallel b) 4.0 ohm in series c) 2.4 ohm in

  2. Science

    One light bulb in a string of lights goes out this causes all other lights in string to go out. This is example of A. Resistor B. parallel circuit C. Closed circuit***** D. Series circuit When a switch is turned from the off to

  3. Physics

    Thanks for any help :) Four 20 ohm resistors are connected in parallel and the combination is connected to a 20V emf device. The current is: A) 0.25A B) 1.0 A C) 4.0 A D) 5.0 A E) 100 E Parallel circuits: I know that the voltage

  4. calculus

    Part of a circuit has two resistors connected in parallel as shown in the figure. R(1) is a constant resistor of 10 ohm, while R(2) is a variable resistor with resistance that varies at a rate of 2 ohms per minute. The total, or

  1. physics

    Resistors R1, R2, and R3 have resistances of 15.0 Ohms, 9.0 Ohms and 8.0 Ohms respectively. R1 and R2 are connected in series, and their combination is in parallel with R3 to form a load across a 6.0-V battery. -What is the total

  2. Physics

    1)Four resistors of 10.0 each are connected in parallel. A combination of four resistors of 10.0 each is connected in series along with the parallel arrangement. What is the equivalent resistance of the circuit? A)80.0 B)40.4

  3. physics

    A 15.0 Ohms resistor is connected in series to a 120V generator and two 10.0 Ohms resistors that are connected in parallel to each other. -What is the total resistance of the load? -What is the magnitude of the circuit current?

  4. science(check answers)

    1.D 2.A 3.A 4.im not sure please help 5.false One light bulb in a string of lights goes out. This causes all of the other lights in the string to also go out. This is an example of a A. resistor. B. parallel circuit. C. closed

  1. physics

    A series circuit is formed with a 10-V power supply and two resistors, where R1 = 6 ohms and R2 = 4 ohms. The current through the resistors is I1 and I2, respectively. What are the values of I1 and I2? I1 = I2 = 1.0 A I1 = I2 =

  2. Physics ASAP!!

    1. Three resistors are placed in series. They have the following resistances: R1 = 20 ohms, R2 = 20 ohms, R3 = 10 ohms. What current would be moved through this circuit by a 5-V power supply? A. 1.0 A B. 0.10 A C. 25 A D. 250 A 2.

  3. physics/electrical circuits

    if there are eleven resistors of 33k ohms each in parallel, what is the total resistance?

  4. Circuits2

    Three impedances zL=3+j4 ohms, zC=4-j4 ohms and zR=0+j3 ohms are connected in parallel. solve for the power factor of the combination.

You can view more similar questions or ask a new question.