Physics

A copper cylinder with a cross-sectional area 0.034 m^2 is placed vertically on a tabletop. What is the weight of the cylinder if it exerts an 800 Pa of pressure on the table top?

  1. 👍
  2. 👎
  3. 👁
  1. what is 800N/m^2 * areainm^2 ?

    weight=pressure*area

    1. 👍
    2. 👎
    👤
    bobpursley

Respond to this Question

First Name

Your Response

Similar Questions

  1. physics

    The intake in the figure has cross-sectional area of 0.75 m2 and water flow at 0.41 m/s. At the outlet, distance D = 180 m below the intake, the cross-sectional area is smaller than at the intake and the water flows out at 9.6

  2. physics

    A net charge of 47 mC passes through the cross-sectional area of a wire in 19.0 s. (a) What is the current in the wire? 1 A (b) How many electrons pass the cross-sectional area in 1.0 min? 2 . electrons I got 9.3e+22 for B but its

  3. Physics

    A hydraulic lift in a garage has two pistons: a small one of cross-sectional area 3.70cm2 and a large one of cross-sectional area 210cm2 . Part A If this lift is designed to raise a 3100-kg car, what minimum force must be applied

  4. Physics

    A copper wire with a length 2.0m, cross sectional area 7.1x10^-6 m^2 and young's modulus 11x10^10 N/m^2 has a 200kg load hung on it. What is its increase the length? (g=9.8 m/s^2) im not sure how to start this problem or what

  1. Physical Education

    Suppose that blood flows through the aorta with a speed of 0.35 m/s. The cross-sectional area of the aorta is 2.0x10-4 m2. (a) Find the volume flow rate of the blood (b) The aorta branches into tens of thousands of capillaries

  2. Physics

    A liquid (density = 1.65 g/cm^3) flows through two horizontal sections of tubing. In the first section the cross-sectional area is 10.0 cm^2, the flow speed is 275 cm/s, and the pressure is 1.20 x 10^5 Pa. This tubing then rises

  3. phys

    Water flows steadily from an open tank into a pipe as shown in the figure. The elevation of the top of the tank is 12.3 m, and the elevation at the pipe is 3.80 m. The initial cross-sectional area of the pipe (at point 2) is

  4. physics

    Water flows steadily from an open tank into a pipe. The elevation of the top of the tank is 10.2 m, and the elevation at the pipe is 3.90 m. The initial cross-sectional area of the pipe is 6.40×10^−2 m; and at where the water

  1. PHYS101

    For a system,the cylinder on the left,at L,has a mass of 600kg and a cross-sectional area of 800centi meter squad.The piston on the right,at S,has cross-sectional area 25centi meter squad abd negligible weight.If the apparatus is

  2. physics

    How much charge passes through a cross-sectional area of a copper wire in 0.8 s if I = 3.5 A? 1 C

  3. physics

    A venturi meter is a device for measuring the speed of a fluid within a pipe. The drawing shows a gas flowing at a speed v2 through a horizontal section of pipe whose cross-sectional area A2 = 0.0900 m2. The gas has a density of

  4. physics

    A movable piston having a mass of 8.00 kg and a cross-sectional area of 5.00 cm2 traps 0.200 moles of an ideal gas in a vertical cylinder. If the piston slides without friction in the cylinder, how much work is done on the gas

You can view more similar questions or ask a new question.