# physics

A person's density 980 kg/m3 is floating in salt-saturated water if density 1210 kg/m3.
1. what percentage of the person's volume is submerged?
2. what percentage of the person's volume is above the surface?
I found the percent submerged by doing Vsub/Vob, and got that the object is 80.99% submerged. I can't figure out how much is above the surface?

1. 👍 0
2. 👎 0
3. 👁 155
1. what is 100-80.99 ?

1. 👍 0
2. 👎 0

## Similar Questions

1. ### physics

A boat floating in fresh water displaces water weighing 35.6 kN. (a) What is the weight of the water this boat displaces when floating in salt water of density 1.10 x 10^3 kg/m^3? (b) What is the difference between the volume of

asked by Meghan on November 14, 2010
2. ### physics

A board that is 20 cm wide, 5 cm thick, and 3 m long has a density of 350 kg/m^3. The board is floating partially submerged in water do density 100 kg/m^3. What fraction of the volume of the board is floating above water?;

asked by David on July 13, 2013
3. ### Chemistry

1.33dm³ of water at 70°c are saturated by 2.25moles of Pb(NO3)2, and 1.33dm³ of water at 18°c are saturated by 0.53mole of the same salt. If 4.50dm³ of the saturated solution are cooled from 70°c to 18°c.calculate the

asked by Kashim on March 20, 2017
4. ### chemistry

A 2.500×10−2M solution of NaCl in water is at 20.0∘C. The sample was created by dissolving a sample of NaCl in water and then bringing the volume up to 1.000 L. It was determined that the volume of water needed to do this was

asked by Jason on May 24, 2015
5. ### physics

The density of ice is 917 kg/m3, and the density of sea water is 1025 kg/m3. A swimming polar bear climbs onto a piece of floating ice that has a volume of 5.34 m3. What is the weight of the heaviest bear that the ice can support

asked by Anonymous on November 17, 2012
1. ### Chemistry

Sea water contains an average of 270 ppm of sulfate ion. Calculate the molar concentration of sulfate given that the average density of sea water is 1.02 g/ml. -At first i tried assuming that density is 1.00 g/ml which is a common

asked by xavier on June 12, 2013
2. ### Physics

Salt water is poured into a U tube until it stands 0.250 m high in each arm. Oil is then added slowly to one arm until the salt water in the other arm stands 0.300 m high. The free surface of the oil then stands at 0.321 m high.

asked by Jon on December 11, 2015
3. ### science

Mercury, a metal that is liquid at room temperature, has a density 13.5 times the density of water. How many pennies could your boat hold if we were floating it in mercury instead of water?

asked by Samantha on January 14, 2014
4. ### Physics

In a huge oil tanker, salt water has flooded an oil tank to a depth of h2 = 4.50 m. On top of the water is a layer of oil h1 = 7.55 m deep, as in the cross-sectional view of the tank as shown in the figure. The oil has a density

asked by Courtney on October 28, 2014
5. ### physics

The density of ice is 917 kg/m3, and the density of sea water is 1025 kg/m3. A swimming polar bear climbs onto a piece of floating ice that has a volume of 3.25 m3. What is the weight of the heaviest bear that the ice can support

asked by Lucy on November 1, 2012
6. ### Physics

Is this correct?? Metal block weighs 500g in air and 446g completely submerged in water. Calculate density and relative density. Density of water = 1000kg/m3 BF (Buoyant force) will be 500g-446g = 0.54 g (or 0.054 kg). For volume:

asked by Danny on April 10, 2015