physics
 👍
 👎
 👁

 👍
 👎
Respond to this Question
Similar Questions

Maths
An iron pipe of internal diameter 2.8 cm and uniform thickness 1 mm is melted and a solid cylindrical rod of the same length is formed. Find the diameter of the rod.

physics
A rigid rod holds a restaurant sign horizontally from the side of a building. The force due to gravity acting on the sign is 165N with the angle between the sign and the rod being 50 degrees. Ignoring the weight of the rod what is

physics
A commonly used method of fastening one part to another part is called "shrink fitting." A steel rod has a diameter of 2.0046 cm, and a flat plate contains a hole whose diameter is 2.0000 cm. The rod is cooled so that it just fits

PHYSICS 102E
a brass ring of diameter 10.00cm at 20.0 degrees Celsius is heated and slipped over an aluminum rod of diameter 10.01cm at 20.0 degrees Celsius. Assuming the average coefficients of linear expansion are constant, (a) to what

Mathematics
A cylindrical iron rod 8cm height and 6cm in diameter stands in a cylindrical tin 12cm in diameter water is poured into the tin unfit it's depth is 8cm how far until the level drop when the rod is removed

AP Physics
A uniform thin rod of length 0.3m and mass 3.5kg can rotate in a horizontal plane about a vertical axis through its center. The rod is at rest when a 3g bullet traveling in the horizontal plane of the rod is fired into one end of

Physics
A thin uniform rod has a length of 0.550 m and is rotating in a circle on a frictionless table. The axis of rotation is perpendicular to the length of the rod at one end and is stationary. The rod has an angular velocity of 0.4

physics
At 20 degrees C an aluminum ring has an inner diameter of 5.000 cm, and a brass rod has a diameter of 5.050 cm. Keeping the brass rod at 20°C, which of the following temperatures of the ring will allow the ring to just slip over

Physics
According to the Guinness Book of World Records (1990 edition, p. 169), the highest rotary speed ever attained was 2010 m/s (4500 mph). The rotating rod was 15 cm (5.9 in) long. Assume the speed quoted is that of the end of the

..physics.
At 20.0 C, an alumium ring has an inner diameter of 5.0000 cm and a brass rod has a diameter of 5.0500 cm. a. If only the ring is heated, what temperature must it reach so that it will just slip over the rod? b. WHAT IF? If both

physics
A uniform thin rod of length 0.55 m and mass 5.5 kg can rotate in a horizontal plane about a vertical axis through its center. The rod is a rest when a 3.0g bullet traveling in the horizontal plane of the rod is fired into one

Physics
1) Calculate the tensile stress in a 33.000mm diameter rod subjected to a pull of 30.000kN. ANS= MPa (Round to 3 decimal places) Diameter = 33.000mm = 0.033m 30.000kN = 30000N Area = pi*d^2/4 = 3.1416 * 0.033^2/ 4 = 3.1416
You can view more similar questions or ask a new question.