# thermodynamic

If the energy used to heat up a block of 2kg of copper is 115.8 kJ, what is the temperature it was heated to if the starting temperature was 100oC and the specific heat capacity is 386 J/kgK.

thanks

1. q = mass x specific heat x (Tfinal-Tinitial)

posted by DrBob222

First Name

## Similar Questions

1. ### Physic

If the energy used to heat up a block of 2kg of copper is 115.8 kJ, what is the temperature it was heated to if the starting temperature was 100oC and the specific heat capacity is 386 J/kgK.
2. ### physic

If the energy used to heat up a block of 2kg of copper is 115.8 kJ, what is the temperature it was heated to if the starting temperature was 100oC and the specific heat capacity is 386 J/kgK. temperature needed = energy/ mass x
3. ### mechnical

1. A small fly wheel fitted to a motor with a moment of inertia of 80 kg m² slows down from 9000 rpm to 5500 rpm in 7.5 seconds. For the fly wheel, calculate: • The rate of deceleration which you can assume to be constant •
4. ### phy

1. A small fly wheel fitted to a motor with a moment of inertia of 80 kg m² slows down from 9000 rpm to 5500 rpm in 7.5 seconds. For the fly wheel, calculate: • The rate of deceleration which you can assume to be constant •
5. ### physic

If the energy used to heat up a block of 2kg of copper is 115.8 kJ, what is the temperature it was heated to if the starting temperature was 100oC and the specific heat capacity is 386 J/kgK. E=MC(T2-T1) 115800=2*112.85(T2-100)
6. ### physic..plz check if corrected

If the energy used to heat up a block of 2kg of copper is 115.8 kJ, what is the temperature it was heated to if the starting temperature was 100oC and the specific heat capacity is 386 J/kgK. E=MC(T2-T1) 115800=2*112.85(T2-100)
7. ### intro chem HELp please

1. Zinc is often used to calibrate calorimeters because it undergoes a very sharp phase transition from the solid to the liquid at 419.5oC. Calculate the enthalpy change when 5 g of zinc metal is heated from 100oC to the point
8. ### Physics - calorie

This was my problem: 4.) The specific heat capacity of copper is 0.092 cal/g*oC. Show that the amount of heat needed to raise the temperature of a 10-g piece of copper from 0oC to 100oC is 92 cal. How does this compare with the
9. ### Chemistry!

The heat lost or gained by a system is related to its temperature change by a property called its heat capacity. The molar heat capacity of metals at or above room temperature equals 24.92 J K-1mol-1. The temperature of a block of
10. ### Chemistry

The heat lost or gained by a system is related to its temperature change by a property called its heat capacity. The molar heat capacity of metals at or above room temperature equals 24.92 J K-1mol-1. The temperature of a block of

More Similar Questions