How much time required to fill the 1000litre water tank with 2 inch pipe
How it calculate

  1. 👍 0
  2. 👎 0
  3. 👁 131
  1. How many liters does the pipe discharge in an hour or a minute?

    1. 👍 0
    2. 👎 0
    Ms. Sue
  2. Or -- how long does it take 1 liter to come out of the pipe?

    1. 👍 0
    2. 👎 0
    Ms. Sue

Respond to this Question

First Name

Your Response

Similar Questions

  1. akgebra

    One pipe can fill a tank in 20 minutes, while another takes 30 minutes to fill the same tank. How long would it take the two pipes together to fill the tank?

  2. Chemistry

    Imagine that you have a 7.00L gas tank and a 3.50L gas tank. You need to fill one tank with oxygen and the other with acetylene to use in conjunction with your welding torch. If you fill the larger tank with oxygen to a pressure

  3. Algebra

    ) An inlet pipe can fill an empty tank in 5 hours by itself, and an outlet pipe can drain the same tank when full in 7 hours by itself. If the tank is two-thirds full when the valves for both pipes are opened, how many minutes

  4. Algebra

    2 pumps can fill a water tank in 45 minutes when working together. Alone, the second pump takes 3 times longer than the first to fill the tank. How long does it take the first pump alone to fill the tank? Show all work

  1. Physics

    Assume it takes 6.00 minutes to fill a 45.0 gal gasoline tank. (1 U.S. gal = 231 in.3) I don't know how to solve for part C. (a) Calculate the rate at which the tank is filled in gallons per second. ANSWER: 0.125 (b) Calculate the

  2. Fluid Mechanics

    Water flows into a cylindrical tank through pipe 1 at a rate of 25 ft/s and leaves through pipe 2 at 10 ft/s and through pipe 3 at 12 ft/s. Pipe 4 is an open air vent. Internal diameters of the pipes are: D1=3 in, D2= 2 in, D3=2.5

  3. physics

    Water flows steadily from an open tank into a pipe. The elevation of the top of the tank is 10.2 m, and the elevation at the pipe is 3.90 m. The initial cross-sectional area of the pipe is 6.40×10^−2 m; and at where the water

  4. maths

    A spherical tank of diameter 3m is filled with water from a pipe of radius 30cm at 0.2m/s.calculate an corect to 3s.f the time in minute it take to fill the tank.thankyou godbless

  1. math

    Three water pipes are used to fill a swimming pool. The 1st pipe alone takes 8 hours to fill the pool, the 2nd pipe alone takes 12 hours to fill the pool, and the 3rd pipe takes 24 hours to fill the pool. If all 3 pipes are opened

  2. math

    Two pipes can be used to fill a pool. Working together, the two pipes can fill the pool in 2 hours. The larger pipe can fill the pool in 3 hours less time than the smaller pipe can alone. Find the time to the nearest tenth of an

  3. Maths

    3 inlet pipes A,B and C can be used to fill 1000m^3 water storage tank . When 3 pipes are in operation,the tank can be filled in 10hours .When only pipes A and B are used,the time increases to 20 hours. With pipe A and C, the tank

  4. math

    A rectangular tank of base 2.4 m by 2.8 m and a height of 3 m contain 3,600 liters of water initially. Water flows into the tank at the rate of 0.5 liters per second Calculate the time in hours and minutes, required to fill the

You can view more similar questions or ask a new question.