A wheel with rotational inertia I initially rotates with a angular speed ωi . A torque is applied, speeding the wheel up to three times the angular speed in time Δt . A) Find the magnitude of the applied torque. B) Find the work done on the wheel during this time.

  1. 👍 0
  2. 👎 0
  3. 👁 320

Respond to this Question

First Name

Your Response

Similar Questions

  1. Physic (concepts-please check my thoughts)

    A net torque applied to a rigid object always tends to produce? a)translational acceleration b) rotational equilibrium c) rotational acceleration d) rotational inertia e) none of these work (c) Torque produces torsion and tends to

  2. Physics

    A potter’s wheel with rotational inertia of 45 kg m2, is spinning freely at 40 rpm. The potter drops a lump of clay onto the wheel where it sticks a distance 1.2 m from the rotational axis at the wheel’s center. If the

  3. physics

    A wheel starts from rest and rotates with constant angular acceleration and reaches an angular speed of 12.0 rad/s in 3.00 s. Find the angle (in radians) throuh which it rotates in this time.


    A disk has a moment of inertia of 3.0x10^-4 and rotates with an angular speed of 3.5 rad/sec. WHat net torque must be applied to bring it to rest in 3.0s? can some one help me out with this im lost!!!

  1. Physics!

    A wheel rotates with a constant angular acceleration of 3.50 rad/s2. The angular speed of the wheel is 2.00 rad/s at t = 0. If the radius of the wheel is doubled, Are the following statements affected? If so, in what way? (Select

  2. phys

    A disk rolls down a slope. It rotational axis is its center of mass. It is rotation at a constant angular speed making 34.0 full revolutions in a time interval of 3.30 s. 1)What is the rotational inertia of the disk if its mass is

  3. Please check solution

    A uniform solid disk with a mass of 40.3 kg and a radius of 0.454 m is free to rotate about a frictionless axle. Forces of 90.0 N and 125 N are applied to the disk (a) What is the net torque produced by the two forces? (Assume

  4. physics

    A ball rolls down a hill mainly because of: a. an unbalanced torque b. an unbalanced force c. its rotational inertia d. angular momentum I think it is d - but I am unsure. Any advice?

  1. Physics

    A wheel with rotational inertia I is mounted on a fixed, fricitonless axle. The angular speed w of the wheel is inccreased from zero to w_f in a time interval T. 1: What is the average net torque on the wheel during the time

  2. physics

    An antique carousel that’s powered by a large electric motor undergoes constant angular acceleration from rest to full rotational speed in 6 seconds. When the ride ends, a brake causes it to decelerate steadily from full

  3. Physics Angular Momentum

    A bullet with a mass m = 4.83 g and initial speed of 330 m/s passes through a wheel which is initially at rest as in the gure. The wheel is a solid disk with mass M = 2.29 kg and radius R = 18.6 cm The wheel rotates freely about

  4. Physics

    A spinning wheel is slowed down by a brake, giving it a constant angular acceleration of −4.60 rad/s2. During a 2.60-s time interval, the wheel rotates through 85.4 rad. What is the angular speed of the wheel at the end of the

You can view more similar questions or ask a new question.