1. Questions

Physics

Draw a block and tackle system of pulleys with a velocity ratio of 5.A block and tackle with a velocity ratio of 5 is used to raise a mass of 25kg through a vertical distanceof 40cm at a steady rate. If the efforts is equal to 60N, determine
a)d distance moved by the effort
b)the work done by the effort in lifting the load
c)the loss in energy involved in lifting the load.

  1. 👍
  2. 👎
  3. 👁
  4. ℹ️
  5. 🚩
Nelson

  1. velocity ratio of 5 implies a distance ratio of 5

    5 * 0.40 m = 2 m

    work done by arms = 60*2 = 120 Joules

    work done by lift on mass = 25*9.81*0.20
    = 49.05 Joules

    loss in energy = 120 - 49 = 71 Joules

    1. 👍
    2. 👎
    3. ℹ️
    4. 🚩
    Anonymous

  2. how do you get Your question b answer

    1. 👍
    2. 👎
    3. ℹ️
    4. 🚩
    lekan

  4. It has been so helpful to me.

    1. 👍
    2. 👎
    3. ℹ️
    4. 🚩
    Akankwasa Gloria

Respond to this Question

First Name

Your Response

Similar Questions

  1. Physics

    Block B in the figure(Figure 1) rests on a surface for which the static and kinetic coefficients of friction are 0.65 and 0.40, respectively. The ropes are massless.What is the maximum mass of block A for which the system is in

  2. Physics

    A block and tackle having a velocity ratio of 5 is used to raise a load of 400N through a distance of 10m. If the work done against friction is 100J. Calculate 1. Efficiency of the machine 2. The effort applied

  3. physics

    a block and tackle system of pulleys consisting of 5 pulleys is used to raise a load of 500N through a height of 12m. if the total work done by the system is 7200j calculate the work done against friction and efficiency of the

  4. Physics

    A block and tackle system consisting of 5 pulleys is used to raise a load of 400 N through a height of 10 m. If the work done against friction is 100 j, calculate

  1. physics

    A 3 kg block (block A) is released from rest at the top of a 20 m long frictionless ramp that is 5 m high. At the same time, an identical block (block B) is released next to the ramp so that it drops straight down the same 5 m.

  2. cary collage

    "A 2.5-kg block slides down a 25 degree inclined plane with constant acceleration. The block starts from rest at the top. At the bottom, its velocity reaches 0.65 m/s. The length of the incline is 1.6m. a) What is the acceleration

  3. physics

    A string going over a massless frictionless pulley connects two blocks of masses 4.4 kg and 11 kg. As shown on the picture below, the 4.4 kg block lies on a 23◦ incline; the coefficient of kinetic friction between the block and

  4. physics

    A block and tackle has a velocity ratio of 4 and it is used to vertically raise a load of mass 50kg.if the effciency is 80%,determine the minimum effort reguired to raise the load.

  1. Physics

    A block and tackle system of 5 pulleys is used to raise a load of 500N steadily through a height of 20m.The work done against friction is then 2000J.Calculate the efficiency of the system.

  2. English,maths,physics,chemistry

    Topic:machine,a block and tackle of 6 pulleys is used to raise a load of 300N steadily through a height of 30m.if the work done against friction is 2000J. calculate:the work done by effort,the efficiency of the system,the applied

  3. general physics

    A string going over a massless frictionless pulley connects two blocks of masses 5.9 kg and 9.5 kg. the 5.9 kg block lies on a 31 ◦ incline; the coefficient of kinetic friction between the block and the incline is µ = 0.22. The

  4. Physics

    A block and tackle system of pulleys consisting of 4 pulleys is used to raise a load of 50N through a height of 20m If the total workdone against friction in the pulleys is equivalent to 800j Calculate I.Total workdone by the

View more similar questions or ask a new question.