physics

A variable-speed drill, initially turning at 150 rpm, speeds up to 1300 rpm in a time interval of 1.0 s. What is its average rotational acceleration?

______rpm/s2

  1. 👍
  2. 👎
  3. 👁

Respond to this Question

First Name

Your Response

Similar Questions

  1. Physics

    A potter’s wheel with rotational inertia of 45 kg m2, is spinning freely at 40 rpm. The potter drops a lump of clay onto the wheel where it sticks a distance 1.2 m from the rotational axis at the wheel’s center. If the

  2. Physics

    A merry-go-round is a common piece of playground equipment. A 2.4 m diameter merry-go-round with a mass of 300 kg is spinning at 22 rpm. John runs tangent to the merry-go-round at 5.0 m/s, in the same direction that it is turning,

  3. physics

    If the rotational speed of a CD changes from 550 rpm to 200 rpm as it plays 30 minutes of music, what is the CD's average rotational acceleration?

  4. Physics

    A 1.5 kg , 20-cm-diameter turntable rotates at 110 rpm on frictionless bearings. Two 550 g blocks fall from above, hit the turntable simultaneously at opposite ends of a diameter, and stick. What is the turntable's angular

  1. Physics

    The blades of a fan running at low speed turn at 200 rpm. When the fan is switched to high speed, the rotation rate increases uniformly to 340 rpm in 5.92 s. (a) What is the magnitude of the angular acceleration of the blades? (b)

  2. Physics

    What is the magnitude of the acceleration of a speck of clay on the edge of a potter's wheel turning at 44 rpm (revolutions per minute) if the wheel's diameter is 31 cm?

  3. Physics

    A wheel with radius of 25cm turning at 120 rpm uniformly increases its frequency to 660 rpm in 9s. Determine: i) the centripetal acceleration ii)the total acceleration of the system

  4. phy

    An automobile engine slows down from 3500 rpm to 1100 rpm in 4.5 s. (a) Calculate its angular acceleration, assumed constant. rad/s2 (b) Calculate the total number of revolutions the engine makes in this time. rev I got answer for

  1. physics

    A variable-speed drill, initially turning at 150 rpm, speeds up to 1300 rpm in a time interval of 1.0 s. What is its average rotational acceleration? ----- rpm/s2

  2. Physics help please!!!

    The angular speed of digital video discs (DVDs) varies with whether the inner or outer part of the disc is being read. (CDs function in the same way.) Over a 133 min playing time, the angular speed varies from 570 rpm to 1600 rpm.

  3. Physics

    a dentists drill starts from rest. after 5.39 seconds of constant angular accleration, it is rotating at a rate of 2.85E4 rpm. through what angle did it rotate in the process? (i just don't know what formula to use)

  4. Physics

    Three children are riding on the edge of a merry–go–round that is 84 kg, has a 1.40–m radius, and is spinning at 20.0 rpm. The children have masses of 21.0, 24.0, and 29.0 kg. If the child who has a mass of 24.0 kg moves to

You can view more similar questions or ask a new question.