Respond to this Question
Similar Questions

Volume and surface area of solids
A hemispherical tank, full of water, is emptied by a pipe at the rate of 22/7 litres per second. How much time it will take to empty half the tank if the diameter of the base of the tank is 3m?
asked by Satish on February 1, 2019 
maths
a hemispherical tank full of water is emptied by a pipe at the rate of 25/7 litres/second.How much time will it take to make the tank half empty,if the tank is 3 metres in diameter?
asked by shilpi on January 13, 2015 
math
a water tank is supplied by a pipe of diameter50cm the pipe is replaced by k pipe each of which has diameter 10cm.find k.
asked by rebika on August 9, 2017 
physics
A large water tank has an inlet pipe and an outlet pipe. The inlet pipe has a diameter of 2.19 cm and is 1.25 m above the bottom of the tank. The outlet pipe has a diameter of 5.93 cm and is 4.85 m above the bottom of the tank. A
asked by maria on March 21, 2012 
Fluid Mechanics
Water flows into a cylindrical tank through pipe 1 at a rate of 25 ft/s and leaves through pipe 2 at 10 ft/s and through pipe 3 at 12 ft/s. Pipe 4 is an open air vent. Internal diameters of the pipes are: D1=3 in, D2= 2 in, D3=2.5
asked by Katy on September 10, 2013 
Physics
A 0.8 m diameter tank is filled with water to a depth of 2.2 m and is open to the atmosphere at the top. The water drains through a 1.0 cm diameter pipe at the bottom; that pipe then joins a 1.5 cm diameter pipe open to the
asked by Drake on December 4, 2012 
Physics
A large water tank has an inlet pipe and an outlet pipe. The inlet pipe has a diameter of 2.19 cm and is 2.13 m above the bottom of the tank. The outlet pipe has a diameter of 5.49 cm and is 4.85 m above the bottom of the tank. A
asked by mican on April 18, 2014 
MATHS
A cylindrical water tank of diameter 1.4m and height 2.1m is being feed by a pipe of diameter 3.5cm through which water follows at the rate of 2m/per second . In how much time the tank will be filled ???
asked by TUHITUHI on November 24, 2012 
math
A rectangular tank measure 4m by 2.5m by 10m. If the empty tank is to be filled in 10mins by a cylindrical pipe through which water is forced at a rate of 1 metre per second, find to 3 significant figures the diameter of the pipe
asked by Jermaine on December 7, 2015 
calculus (please help. URGENT!)
A hemispherical tank with a radius of 10m is filled from an input pipe at a rate of 3m^3/min. How fast is the water level rising when the water level is 5m from the bottom of the tank? (hint: the volume of the cap of thickness of
asked by Linda on April 15, 2015