Maths

A records voltages from 0 volts to 20 volts. If the average value for three readings on the meter was 16 volts, then what the smallest number possible reading, in volts?

  1. 👍 0
  2. 👎 0
  3. 👁 69
  1. since the largest reading is 20, you have

    x+20+20 = 3*16
    x = 8
    for the smallest.

    1. 👍 0
    2. 👎 0
    posted by Steve

Respond to this Question

First Name

Your Response

Similar Questions

  1. maths

    1).Last year, a shopkeeper sold an average of 7 cartons of apples from january to april. He sold an average of 9 cartons of apples from june till end of the year. What is the total number of cartons he sold in the 11 months? if

    asked by RS on May 19, 2012
  2. statistics

    the authors's generac generator produces voltage amounts with a mean of 125.0 volts and a standard deviation of 0.3 volts, and the voltages have a bell-shaped distribution. using the empiral rule, what is the percentage of voltage

    asked by marie on September 19, 2011
  3. PHYSICS 1112

    A cube of side length L = 10 cm is centered at the origin of an x,y,z (cartesian) coordinate system. The electric potential V (x, y, z) is measured at the centers of the six faces of the cube to be the values shown below. Using

    asked by Eddy on February 4, 2010
  4. physics

    Consider a transformer with a primary that has 50 turns of wire and a secondary of 250 turns. Then a 110-V input will produce an output of which of the following? A) 550 volts.B) 110 volts.C) 300 volts.D) 50 volts.E) 22 volts.

    asked by Jim on April 14, 2012
  5. Algebra

    Two electrical voltages have a total of 126 volts. If one voltage is 32 more than the other, find the voltages. Started off with x =126V Y = 32v now stuck

    asked by Mea on June 1, 2014
  6. physcial science

    A transformer has a primary coil with 600 turns and a secondary coil with 300 turns. If the output voltage is 320 volts, what is the input voltage? A. 8 volts B. 150 volts C. 640 volts D. 600 volts

    asked by sid on October 20, 2015
  7. Physics

    suppose you had a circuit with three resistors in series and you measured I=7.0 milliamps; V = 14.7 volts; V1= 3.5 volts and V2 = 1.4 volts. What would be the voltage across the third resistor? What would its resistance be?

    asked by Anonymous on February 17, 2015
  8. Physics

    Suppose you had a circuit with three resistors in series and you measured I=7.0 milliamps; V = 14.7 volts; V1= 3.5 volts and V2 = 1.4 volts. What would be the voltage across the third resistor? What would its resistance be?

    asked by Dean on February 17, 2015
  9. Physics

    Suppose you had a circuit with three resistors in series and you measured I=7.0 milliamps; V = 14.7 volts; V1= 3.5 volts and V2 = 1.4 volts. What would be the voltage across the third resistor? What would its resistance be?

    asked by Dean on February 18, 2015
  10. science

    vs =6 volts vth =2 volts ida(diode current)=1m amp no value given for resistor network find rth(thevenien) 2,000 and 4000 do not work. diode current must not be equal to isc.?? voc=2 volts

    asked by bear on December 16, 2015

More Similar Questions