physics
 👍
 👎
 👁

 👍
 👎
Respond to this Question
Similar Questions

Physics
A ventilation fan has blades 0.25 m long rotating at 20 rpm. What is the centripetal acceleration of a point on the outer tip of a blade?

trigonometry
The wheels of a car have radius 11 in. and are rotating at 800 rpm. Find the speed of the car in mi/h. mi/h

physics
20 kg , 30 cm diameter disk is spinning at 300 rpm. How much friction force must be applied to rim to bring the disk to a halt in 3.0s?

Physics
A dentist's drill starts from rest. After 3.20 s of constant angular acceleration it turns at a rate of 2.7 104 rev/min. (a) Find the drill's angular acceleration. (b) Determine the angle (in radians) through which the drill

Physics
At takeoff a commercial jet has a 45.0 m/s speed. Its tires have a diameter of 0.850 m. (a) At how many rpm are the tires rotating? Incorrect: Your answer is incorrect. rpm (b) What is the centripetal acceleration at the edge of

trigonometry
A Wheel of radius 14in. is rotating 0.5 rad/sec. What is the linear speed v, the angular speed in RPM ( rev per min), and the angular speed in deg/sec?

physics
If the rotational speed of a CD changes from 550 rpm to 200 rpm as it plays 30 minutes of music, what is the CD's average rotational acceleration?

Physicscircular force
A coin is placed 11.0 cm from the axis of a rotating turntable of variable speed. When the speed of the turntable is slowly increased, the coin remains fixed on the turntable until a rate of 31 rpm is reached, at which point the

Physics
The blades of a fan running at low speed turn at 200 rpm. When the fan is switched to high speed, the rotation rate increases uniformly to 340 rpm in 5.92 s. (a) What is the magnitude of the angular acceleration of the blades? (b)

Electric Power Tools
I need help with my test, I don't know if they are all right or not. I answered the questions to the best of my ability. My answers are marked with an *. 1. What is the typical noload speed of a highspeed drill? A. 1,000 rpm *B.

physics
An electric drill starts from rest and rotates with a constant angular acceleration. After the drill has rotated through a certain angle, the magnitude of the centripetal acceleration of a point on the drill is twice the magnitude

Physics
A coin is placed 11.0 cm from the axis of a rotating turntable of variable speed. When the speed of the turntable is slowly increased, the coin remains fixed on the turntable until a rate of 31 rpm is reached, at which point the
You can view more similar questions or ask a new question.