# Chemistry

Consider a cylinder containing 2 mol of an ideal gas at an initial temperature of 25 C. The cylinder is fitted with a piston on which a weight is placed, subjecting the gas to a constant pressure of 2.66 atm. The cylidner is then wrapped with a heater, from which 1.50 kJ of heat is absorbed by the gas, forcing the piston to move upwards under constant pressure.

What is the final temperature of the gas?

1. 👍
2. 👎
3. 👁

## Similar Questions

1. ### physics

We start with 5.00 moles of an ideal monatomic gas with an initial temperature of 123C. The gas expands and, in the process, absorbs an amount of heat equal to 1300J and does an amount of work equal to 2040J. What is the final

2. ### Physics

The drawing shows an ideal gas confined to a cylinder by a massless piston that is attached to an ideal spring. Outside the cylinder is a vacuum. The cross-sectional area of the piston is A = 2.50 10-3 m2. The initial pressure,

3. ### Chemistry

A compressed gas cylinder contains 1.00 103 g of argon gas. The pressure inside the cylinder is 2096 psi (pounds per square inch) at a temperature of 19°C. How much gas remains in the cylinder if the pressure is decreased to 656

4. ### physics

A cylinder that has a 40.0 cm radius and is 50.0 cm deep is filled with air at 20.0°C and 1.00 atm. A 21.0 kg piston is now lowered into the cylinder, compressing the air trapped inside. Finally, a 79.0 kg man stands on the

1. ### Chemistry 140A

A gas cylinder containing 6.38 mol of neon has a pressure of 491 mm Hg at 295 K. If 3.22 mol of helium is added to this cylinder, at constant temperature and volume, what will be the pressure in the cylinder?

2. ### physics

A 22.0-L tank of carbon dioxide gas (CO2) is at a pressure of 9.40 105 Pa and temperature of 22.0°C. (a) Calculate the temperature of the gas in Kelvin. K (b) Use the ideal gas law to calculate the number of moles of gas in the

3. ### Chemistry

An ideal gas is contained in a cylinder with a volume of 5.0 102 mL at a temperature of 30.°C and a pressure of 710. torr. The gas is then compressed to a volume of 38 mL, and the temperature is raised to 827°C. What is the new

4. ### chem

An ideal gas in contained in a cylinder with a volume of 5.0x102mL at a temperature of 30C and a pressure of 710 torr. The gas is then compressed to a volume of 25mL, and the temperature is raised to 820C. What is the new pressure

1. ### chemistry

Consider a system consisting of a cylinder with a movable piston containing 10^6 gas molecules at 298K at a volume of 1L. Consider the following descriptions of this system: 1. Initial system 2. Starting from the initial system,

2. ### Physics

A cylinder with a valve at the bottom is filled with an ideal gas. The valve is now opened and some of the gas escapes slowly. The valve is then closed, after which the piston is observed to be at a lower position. Assume that the

3. ### Physics

1) A sample of gas is in a cylinder with a moveable piston. The force on the piston can be varied, altering the pressure and volume. A sample of gas is taken from an initial state to a final state following a curve on a pV diagram

4. ### Physics

A sample of a monatomic ideal gas is originally at 20 °C. Calculate its final temperature of the gas if the pressure is doubled and volume is reduced to one-fourth its initial value.