Physics

A worker pushes a 1500 N crate with a horizontal force of 345 N a distance of 24 m. Assume the coefficient of kinetic friction between the crate and the floor is .220. How much work is done by the floor on the crate?

-M*g*(mu,k)*X
Mg = 1500 N
mu,k = 0.220
X = 24 m
It is negative because the block's motion is in the opposite direction to the friction force exerted by the floor.

  1. 👍
  2. 👎
  3. 👁
  1. 8280J

    1. 👍
    2. 👎

Respond to this Question

First Name

Your Response

Similar Questions

  1. Physics

    Two workers are sliding 360 kg crate across the floor. One worker pushes forward on the crate with a force of 380 N while the other pulls in the same direction with a force of 280 N using a rope connected to the crate. Both forces

  2. PHYSICS

    A warehouse worker pushes a crate along the floor, as shown in the figure , by a force of 10.0 N that points downward at an angle of 45.0 degree below the horizontal. A. Find the horizontal component of the push. B.Find the

  3. physics

    to push a 25 kg crate up a 27 incline, a worker exerts a force of 120 N, parallel to the incline. As the crate slides 3.6 m, how much work is done on the crate by a) the worker b) force of gravity c) normal force

  4. Physics

    Two workers are sliding 310kg crate across the floor. One worker pushes forward on the crate with a force of 440N while the other pulls in the same direction with a force of 230N using a rope connected to the crate. Both forces

  1. physics

    A stock room worker pushes a box with mass 11.2 kg on a horizontal surface with a constant speed of 4.50 m/s. The coefficient of kinetic friction between the box and the surface is 0.25. a) What horizontal force must be applied by

  2. physics

    A car travelling at 25 m/s slams its break leaving skids marks along a distance 125 m as it comes to rest. the coefficient f friction between the tire and the road is a 5 b 2.5 c 1 2 .4 e .25 A 500N worker pulling a 500 N crate on

  3. physics

    A worker pushes a wheelbarrow with a force of 40 N over a level distance of 6.0 m. If a frictional force of 24 N acts on the wheelbarrow in a direction opposite to that of the worker, what net work is done on the wheelbarrow?

  4. physics

    A 63.8 N crate is pulled up a 5.22 m inclined plane by a worker at constant velocity. If the plane is inclined at an angle of 59 degree to the horizontal and there exists a constant frictional force of 32.6 N between the crate and

  1. Physics- Work

    A worker pushes a 1.50*10^3 N crate with a horizontal force of 345 N a distance of 24.0 m. Assume the coefficient of kinetic friction between the crate and the floor is 0.220. a. How much work is done by the worker on the crate?

  2. Physics

    A horizontal force of 150 N is used to push a 33.0 kg packing crate a distance of 6.65 m on a rough horizontal surface. If the crate moves at constant speed and the work done is 997.5 joules. What is the coefficient of kinetic

  3. Physics

    A horizontal force of 45N applied to a crate of mass 9kg is just sufficient to move it. If the crate is now pulled at an angle of 50° to the horizontal, find the force required to move the crate over the horizontal surface.

  4. Physics

    A horizontal force of 150 N is used to push a 43.5 kg packing crate a distance of 5.30 m on a rough horizontal surface. If the crate moves at constant speed, find each of the following. (a) the work done by the 150 N force (b) the

You can view more similar questions or ask a new question.