Chemistry

what volume of 0.1M HCl would be needed to neutralize 0.35M NaOH to a 100ml volume?

  1. 👍
  2. 👎
  3. 👁
  1. The normality of both is one, so
    1*.1M*VolumeACid=1*.35M*100ml

    VolumeAcid=350ml

    1. 👍
    2. 👎
    👤
    bobpursley

Respond to this Question

First Name

Your Response

Similar Questions

  1. science

    what volume of 0.115 M HClO4 solution is needed to neutralize 50.00 ml of o.o875 M NaOH?

  2. Chemistry

    1.) Watch the animation, and observe the titration process using a standard 0.100 M sodium hydroxide solution to titrate 50.0 mL of a 0.100 M hydrochloric acid solution. Identify which of the following statements regarding

  3. chemistry

    A volume of 100mL of 1.00 M HCl solution is titrated with 1.00 M NaOH solution. You added the following quantities of 1.00 M NaOH to the reaction flask. Classify the following conditions based on whether they are before the

  4. chemistry

    What volume of 0.1 M NaOH is required to neutralize 30 mL of 0.1 M HCl?

  1. Grade 12 chemistry

    This is the second reaction: HCl(aq)+NaOH(aq)-->NaCl(aq)+H2O(l) (Heat of neutralization) This reaction involves mixing two solutions: 1.00 mol/L NaOH and 1.00 mol/L HCl. Trial 1: 48.0 mL of the NaOH solution is mixed with 47.5 mL

  2. Chemistry

    HA and HB are both weak acids although HB is the stronger of the two. Will it take a larger volume of a 0.10 M NaOH solution to neutralize 50.0 mL of 0.10 M HB than would be needed to neutralize 50.0 mL of 0.10 M HA?

  3. chemistry

    What volume of 0.140 M HCl is needed to neutralize 2.93 g of Mg(OH)2

  4. chemistry

    A 5.309 g antacid tablet, with CaCO3 as the active ingredient, was mixed was 30.0 mL of 0.831 M HCl. After the reaction occurred, it took 15.3 mL of 0.7034 M NaOH to neutralize the excess acid. a) How much HCl (in mL) of was

  1. Chemistry

    Sodium oxide, reacts with water to give NaOH. A) Write a balance equation? B)What is the pH of the solution prepared by allowing 1.55 g of Na2O to react with 500.0 ml of water? (assume there is no volume change) C) How many

  2. Chemisty

    The flask shown here contains 10.0 mL of HCl and a few drops of phenolphthalein indicator. The buret contains 0.270 M NaOH. What volume of NaOH is needed to reach the end point of the titration? What was the initial concentration

  3. Math

    What volume, in ml, of a 60% of HCl acid solution must be added to 100 ml of a 30% HCl solution to make a 36% HCl solution. We need 2 alegabreic (?) equations. The first I can get is: 0.36x - 0.60y = 100ml (this is probably

  4. Chemistry

    A titration setup was used to determine the unknown molar concentration of a solution of NaOH. A .025 M HCl solution was used as the titration standard. The following data were collected. Trial 1 Trial 2 Trial 3 Initial NaOH Buret

You can view more similar questions or ask a new question.