Math

Find the volume of water required to fill a pool with a diameter of 6m and a height of 2m. Keep in mind that the water must travel through a hose before it goes into the pool. Assume the hose is a perfect cylinder. The length of the hose is 8m and the diameter of the inner tubing of the hose is 2cm. Round to the nearest hundredth.

  1. 👍
  2. 👎
  3. 👁
  1. I will assume that the pool is a cylinder.
    volume = π r^2 h
    = π(9)(2) = 18π

    What does the hose have to do with it?
    Was there supposed to be some rate of flow ?

    1. 👍
    2. 👎

Respond to this Question

First Name

Your Response

Similar Questions

  1. thermodynamics

    if a pump discharges 75 gpm of water whose specific weight is 61.5 lb/ft^3(g=31.95fps^2). find a) the mass flow rate in lb/min, and b) and total time required to fill a vertical cylinder tank 10ft in diameter and 12ft high.

  2. Math

    The pool is partially filled with water. The volume of the water in the pool is 45 cubic feet. How deep is the water? A.0.5 ft B.1.5 ft C.2.5 ft** D.3.5 ft Am I right?

  3. calculus

    A circular swimming pool has a diameter of 20 meters, the sides are 3 meters high, and the depth of the water is 2.5 meters. The acceleration due to gravity is 9.8 m/s2 and the density of water is 1000 kg/m3. How much work is

  4. math

    Two pipes can be used to fill a pool. Working together, the two pipes can fill the pool in 2 hours. The larger pipe can fill the pool in 3 hours less time than the smaller pipe can alone. Find the time to the nearest tenth of an

  1. calculus

    A circular swimming pool has a diameter of 14 m, the sides are 4 m high, and the depth of the water is 3.5 m. (The acceleration due to gravity is 9.8 and the density of water is 1000 .) How much work (in Joules) is required to:

  2. Physics

    2. A pool has an area A = 50 m2 and depth h = 2.5 m. The pool is filled with water to the maximum height. An electrical pump is used to empty the pool. There are two pipes coming out the pump: one is submerged into water has a

  3. thermodynamics

    2. If a pump discharges 284 liters per minute of water whose density is 985 kg/m3 . Find (a) mass flow rate in kg/min; (b) the total time required to fill a vertical cylindrical tank 3.05 m in diameter, and 305 m high. Note: m = Q

  4. Physics

    A 5/8 inch (inside) diameter garden hose is used to fill a round swimming pool 7.3m in diameter.How long will it take to fill the pool to a depth of 1.0m if water issues from the hose at a speed of 0.50m/s ?

  1. algebra

    Pump A can fill a swimming pool in 6 hours and pump B can fill the same pool in 4 hours. The two pumps began working together to fill an empty pool, but after 40 minutes pump B broke down, and pump A had to complete the job alone.

  2. Math

    The pool is partially filled with water. The volume of the water in the pool is 45ft^2. How deep is the water? A) 0.5 ft B) 1.5 ft C) 2.5 ft D) 3.5 ft I don't have an answer yet. Can someone help me please?

  3. math

    Three water pipes are used to fill a swimming pool. The 1st pipe alone takes 8 hours to fill the pool, the 2nd pipe alone takes 12 hours to fill the pool, and the 3rd pipe takes 24 hours to fill the pool. If all 3 pipes are opened

  4. Mathematics

    A rectangular swimming pool has a length of 50 m, a width of 25 m, and a depth of 1.75 meters. What is the volume of water needed to fill the swimming pool? The volume of water needed to fill the swimming pool is m3.

You can view more similar questions or ask a new question.