physics14

a non uniform bar which is 3m long weighs 60n. if the center of gravity is 1.1m from the larger end. and if the bar is supported at the midpoint, what load must be suspended at the smaller end to maintain equilibrium?

1. 👍
2. 👎
3. 👁

Similar Questions

1. COLLEGE PHYSICS

Find the x and y coordinates of the center of gravity of a 4ft by 8ft uniform sheet of plywood with the upper right quadrant removed? with out mass of the plywood how do go about calculating the center gravity for x/y coordinates?

2. Physics

Update: Planets are not uniform inside. Normally, they are densest at the center and have decreasing density outward toward the surface. Model a spherically symmetric planet, with the same radius as the earth, as having a density

3. Physics

two students are balancing on a 10 m seesaw . the seesaw is designed so that each side of the seesaw is 5 m long. the student on the left weighs 60 kg and is sitting three meters away from from the fulcrum at the center. the

4. Physics

The figure (Figure 1) shows a model of a crane that may be mounted on a truck.A rigid uniform horizontal bar of mass m1 = 80.0 kg and length L = 5.30 m is supported by two vertical massless strings. String A is attached at a

1. COLLEGE PHYSICS

a uniform bridge span weighs 50x10^3 and is 40m long. A car weighing 15X10^3 is parked with its center of gravity located 12m from the right pier. what upward support force does the left pier provide? im lost....this is what i

2. physics

Find the x- and y-coordinates of the center of gravity of a 4.00 ft by 8.00 ft uniform sheet of plywood with the upper right quadrant removed as shown in the figure below. The dimensions of the cutout are a = 4.50 ft and b = 1.70

3. Physics

A certain type of propeller blan can be modeled as a thin uniform bar 2.50 m long and of mass 24.0 kg that is free to rotate about a frictionless axle perpendicular to the bar at its midpoint. if a technician strikes this blade

4. physics

a 10.0m long bar is attached by a frictionless hing to a wall and held horizontally by a rope that makes an angle of 53 deg with the bar the bar is uniform and weights 39.9 N. how far from the hinge should a 10.0kg mass be

1. physics

Find the x- and y-coordinates of the center of gravity of a 4.00 ft by 8.00 ft uniform sheet of plywood with the upper right quadrant removed as shown in the figure below. The dimensions of the cutout are a = 4.50 ft and b = 1.70

2. Math

Let x represent the number which shows up when a balanced die is rolled. Then x is a random variable with a uniform distribution. Let x-bar denote the mean of the numbers obtained when the die is rolled 32 times. For samples of

3. natural science

a fire fighter who weighs 800n climbs a uniform ladder and stops one third of the way up the ladder. the ladder is 5.0m long and weighs 180n. it rest against a vertical nail, making an angle of 53degree with the ground. find the

4. physics

a uniform wooden beam 10 m long ang weighting 200 N is used to support a load of 300 N on the left end , and 500 N on the right end. Determine the center of the gravity if another load of 80 N is 2 m from the left end