sakre school

A piece of material subjected to three mutually perpendicular stresses of 70,
56 and 84 Mpa. If E = 200GPa, Poisson's ratio = 0.28, determine (10)
(a) Principal strains (b) Shear modules (c) Bulk modules.

  1. 👍
  2. 👎
  3. 👁
  1. Indicate your specific subject in the "School Subject" box, so those with expertise in the area will respond to the question.

    1. 👍
    2. 👎

Respond to this Question

First Name

Your Response

Similar Questions

  1. Math

    An open box is to be made from a square piece of material by cutting four-centimeter squares from each corner and turning up the sides (see figure). The volume of the finished box is to be 144 cubic centimeters. Find the size of

  2. Math

    An open gift box is to be made from a square piece of material by cutting four-centimeter squares from each corner and turning up the sides (see figure). The volume of the finished gift box is to be 324 cubic centimeters. Find the

  3. physics

    A firecracker in a coconut blows the coconut into three pieces. Two pieces of equal mass fly off south and west, perpendicular to each other, at 25 m/s. The third piece has twice the mass as the other two. 1. What is the speed of

  4. Stress & Strain (Help Please)

    A tie bar is made of a material having a tensile strength of 231 MPa and has to carry a load of 255 kN. What id the diameter of the bar if a factor of safety of 7 is applied? ANS = 99.2 mm Cannot figure out how to get the answer.

  1. chemistry

    A piece of a newly synthesized material of mass 25.0 g at 80.0 ◦ C is placed in a calorimeter containing 100.0 g of water at 20.0 ◦ C. If the final temperature of the system is 24.0 ◦ C, what is the specific heat capacity

  2. chemistry

    2C3H6(g) + 2NH3(g) + 3O2(g) -> 2C3H3N(g) + 6H2O(g) A 150.0 liter steel reactor at 25 ºC is filled with the following partial pressures of reactants: 0.500 MPa C3H6, 0.800 MPa ammonia, and 1.500 MPa oxygen gas. If the reaction

  3. math

    An open box is to be made from a square piece of material by cutting four-centimeter squares from each corner and turning up the sides (see figure). The volume of the finished box is to be 576 cubic centimeters. Find the size of

  4. pre-calc

    "An open gift box is to be made from a square piece of material by cutting 2 centimeter squares from each corner and turning up the sides. The volume of the finished gift box is to be 200 cubic centimeters. Find the size of the

  1. engineering

    Problem 1: A long embankment is located on a soil profile consisting of 4m of medium clay followed by 8m of medium to dense sand on top of bedrock. A vertical settlement of 5mm at the center of the embankment was measured during

  2. Materials Science

    A 3-point bending test is performed on a simply supported beam of length L=4m and of rectangular cross-section, with width b and height h. For a central load of 10kN, draw the bending moment and shear force diagrams for the beam.

  3. Algebra

    For their homecoming parade the students of U-Math have created a colorful banner, 53 meters in length, that is made of two pieces of parachute material. The short piece is 19 meters shorter then the long piece. Find the Length of

  4. THEORY OF MACHINE

    The principal stresses at a certain point in a strained material are 150 MPa and 48 Mpa both tensile. Find normal and tangential stresses on a plane inclined at 20 degree with the major principal plane.

You can view more similar questions or ask a new question.