# Chemistry HW!!!

1. If I dilute 75 mL of 0.50 M CaF2 solution to a final volume of 375 mL, what will be the molarity of the resulting solution?

2. What will be the final volume of the solution be if I start with a 250 mL of 1.38 M MgCl2 solution to make a solution with a concentration of 0.30 M?

3. Find the initial mL volume of HCl I would need to make a 500 mL of a 0.15 M HCl solution from a stock bottle of 1.00 M HCl.

4. The final volume of my solution of LiBr must be 482 mL. If I started with 183 mL of a 0.93 M LiBr solution, what will the final molarity of the solution be?

5. I create a stock solution using 15.3 moles of BeI2 and 9.21 Liters of water. I then take 3.29 L of that solution and need to dilute it to a molarity of 0.84 M. What will be the final volume, in Liters, of the 0.84 M solution?

1. 👍 0
2. 👎 0
3. 👁 950
1. Too many questions on one post.
1.
0.50M x (75 mL/375 mL) = ? if you can make a 0.50M CaF2 solution. I didn't think it was that soluble.

2.
Use the dilution formula.
mL1 x M1 = mL2 x M2

1. 👍 0
2. 👎 0
2. You are right DrBob, the maximum solubility of CaF2 at 25-deg C = 2.04 x 10^-3M. The problem data is ~2,500X more soluble than what can be achieved.

1. 👍 0
2. 👎 0

## Similar Questions

1. ### chemistry

A chemist must dilute 55.6 ml of 1.48 M aqueous silver nitrate (AgNO3) solution until the concentration falls to 1.00M. He'll do this by adding distilled water to the solution until it reaches a certain final volume. Calculate

2. ### chemistry! URGENT

A standard solution is prepared for the analysis of fluoxymesterone (C20H29FO3), an anabolic steroid. A stock solution is first prepared by dissolving 10.0 mg of fluoxymestrone in enough water to give a total volume of 500.0 ml. A

3. ### Chem

If you take a 15.0-mL portion of the stock solution and dilute it to a total volume of 0.700L , what will be the concentration of the final solution?

4. ### college chemistry

To dilute a solution from 0.600 M to 0.100 M, the final volume must be A. 1/6 the original volume. B. 0.7 L. C. More information is needed to answer this question. D. 6 times the original volume. E. 60 L.

1. ### Chemistry

If you dilute 14.0mL of the stock solution to a final volume of 0.350L , what will be the concentration of the diluted solution? Before it, there was a question: How many milliliters of a stock solution of 5.60 M HNO3 would you

2. ### chemistry

A chemist must dilute of M aqueous magnesium fluoride solution until the concentration falls to M . He'll do this by adding distilled water to the solution until it reaches a certain final volume. Calculate this final volume, in

3. ### chemistry

If you dilute 10.0mL of the stock solution to a final volume of 0.350L , what will be the concentration of the diluted solution?

4. ### Dilution

What volume of H2O should be added to 500 ML of a 1.0 mol/L CuSO4 solution to dilute it to 0.5 mol/L? This is what I have so far... H20 + CuSO4 --------> H2SO4 + CuO So you use the formula M1V1 = M2V2 so its (0.500)(1.0) =

1. ### chem

Calculate the final concentration of a. 4.0 L of a 4.0 M HNO3 solution is added to water so that the final volume is 8.0L b. Water is added to 0.35L of a 6.0M KOH solution to make 2.0L of a diluted KOH solution. c.A 20.0 mL sample

2. ### BioChem

Calculate the final concentration of ONPG (in μM) if you add 6.16 mL of 3.3 μM ONPG and dilute to a final volume of 10 mL with PBS buffer. I thought you would use M1V1 = M2V2 however it came up wrong I know we are adding 3.84 mL

3. ### Chemistry HELP ME!!!!

A sloution of calcium nitrate, C(NO3), reacts with a solution of ammonium fluoride, NH4F, to form solid calcium fluoride, CaF2, and ammonium nitrate, NH4NO3(ag). When 45.00 mL of 4.8724 x 10 -1M Ca(NO3)2 solution was added to

4. ### Chemistry

A 150ml solution of 0.340M HCl is mixed with a solution of 340ml of 0.175M HNO3. The solution is then diluted to a final volume of 1.00L. How many moles of H+ are present in the final solution?