Physics
 👍 0
 👎 0
 👁 289

 👍 1
 👎 0

 👍 1
 👎 0

 👍 0
 👎 0
Respond to this Question
Similar Questions

Physics
A simple wheel and axle is used to lift a bucket of water from a well the radii of the wheel and axle are 20cm and 4cm respectively determine the theoretical effort required to lift a load of 30N assuming no energy losses
asked by Rodas on April 13, 2020 
Physics
Simple Machines A simple wheel and axle has a wheel diameter of 2.3m and an axle diameter of 92mm. If an effort of 26N is required to raise a mass of 16 kg what is the efficiency of the machine? A 2.46% B 95.3% C 24.1% D 20.1%
asked by Danny on May 11, 2013 
Physics
A bucket of weight 72 N is lifted from a well by the wheel and axle system shown below: If the diameter of the circle of the crank handle (diameter of the wheel) is 120 cm and the diameter of the shaft that the rope is wrapped
asked by Latevi on April 20, 2019 
Maths
A ferris wheel has an axle standing 38m off the ground and a radius of 35m. The wheel takes 5 minutes to complete one revolution. The wheel moves in clockwise motion and you are sitting in one of the carriages which is
asked by Raina on May 1, 2012 
Physics
A wheel and axle arrangement has an axle with a diameter of 25cm. A rope is wrapped around the axle and is supporting a load of 2 tonnes. 1)If the mechanical advantage of the system is 30, determine the diameter of the wheel.
asked by Danny on May 20, 2013

marhs
A wheel is free to rotate about its fixed axle. A spring with constant k = 290 N/m is attached to one of its spokes a distance r = 23 cm from the axle, as shown in the figure. (a) Assuming that the wheel is a hoop of mass m = 490
asked by edward on November 15, 2014 
Physics
In the figure below, a wheel of radius 0.275 m is mounted on a frictionless horizontal axle. A massless cord is wrapped around the wheel and attached to a 1.95 kg box that slides on a frictionless surface inclined at angle θ =
asked by Kimberley on April 3, 2016 
Physical science
Describe how to determine the ideal machanical advantage of each type of simple machine How are the lever and the wheel and axle related?
asked by Angelina on February 3, 2016 
Science
You are holding the axle of a bicycle wheel with radius 30 cm and mass 1.07 kg. You get the wheel spinning at a rate of 79 rpm and then stop it by pressing the tire against the pavement. You notice that it takes 1.11 s for the
asked by Gerrard on November 26, 2012 
Math
A river does 6,500 J of work on a water wheel every second. The wheel's efficiency is 12%. a. How much work in joules can the axle of the wheel do? b. What is the power output of the wheel in 1 s?
asked by Leah on November 3, 2012