
 👍 0
 👎 0
Respond to this Question
Similar Questions

physics
A student thrusts a 0,20T magnet with a cross sectional area of 2.0 cm^2 into a coil of 400 turns in 0,50s. The coil has a resistance of 30 ohms and it is connected in series with a moving coil meter having a resistantace of 170
asked by Tri on June 13, 2008 
Physics
1. A rectangular coil 0.065 m by 0.080 m is positioned so that its crosssectional area is perpendicular to the direction of a magnetic field. The coil has 66 turns and a total resistance of 7.6 Ω and the field decreases at a
asked by Jake on December 21, 2016 
Physics HELP
1. A rectangular coil 0.065 m by 0.080 m is positioned so that its crosssectional area is perpendicular to the direction of a magnetic field. The coil has 66 turns and a total resistance of 7.6 Ω and the field decreases at a
asked by Jake on December 21, 2016 
Physics
A total charge of 16ìC passes through a crosssectional area of a nichrome wire in 4 s. How many electrons pass through the crosssectional area in 16 s? This has to do with Electric current and so i know that means 16ìC = 16 x
asked by Struggling Student on January 19, 2013 
Physics
Two wires have the same length and the same resistance but are made up of different materials. The resistivities of these materials are 3.97 Ù and 1.97 Ù. Obtain the ratio of the smaller crosssectional area to the greater
asked by Beth on June 13, 2012 
maths help
Hi MY question is if a cylinder has a volume of 72cm cubed and a crosssectional area of 18cm squared. Work out the height of the cylinder Can someone show me how we do it by the steps The volume of a cylinder is given by volume =
asked by Ali on April 23, 2007 
physics
Water flows steadily from an open tank into a pipe. The elevation of the top of the tank is 10.2 m, and the elevation at the pipe is 3.90 m. The initial crosssectional area of the pipe is 6.40×10^−2 m; and at where the water
asked by AE on November 30, 2009 
phys
Water flows steadily from an open tank into a pipe as shown in the figure. The elevation of the top of the tank is 12.3 m, and the elevation at the pipe is 3.80 m. The initial crosssectional area of the pipe (at point 2) is
asked by ami on December 9, 2009 
physical
Water flow along horizanta pipe at cross sectional area 48cm which has a constriction at cross sectional area 12cm at one place if the speed at the water at the constriction point is 4m/s calculate the speep at the wide section
asked by Anonymous on September 22, 2013 
physics
A liquid (ρ = 1.65 g/cm^3) flows through two horizontal sections of tubing joined end to end. In the first section the crosssectional area is 10.0 cm^2, the flow speed is 245 cm/s, and the pressure is 1.20 105 Pa. In the second
asked by dave on February 6, 2013