Physics repost

George has a bar magnet and a coil connected to a battery. To perform an experiment, he needs to use different values of current through the wire. How can he generate different values of electric current through the wire without connecting any other device in the circuit?

  1. 👍
  2. 👎
  3. 👁
  1. Use a variable voltage source, or add a rheostat (variable resisor) to the circuit.

    1. 👍
    2. 👎

Respond to this Question

First Name

Your Response

Similar Questions

  1. electrical circuit

    A 72-ohm coil of wire is connected in series with an adjustable resistor (rheostat) whose resistance can be varied from 0 to 88 ohms. If the line potential is 115 volts, calculate (a) the range through which the coil current can

  2. science

    The potential difference measured across a coil is 20 V when a direct current of 2 A is passed through it. With an alternating current of 2 A at 40 Hz, the p.d. across the coil is 140 V. If the coil is connected to a 230 V, 50 Hz

  3. Physics

    When two resistors are connected in series across a 12-V battery, 1.1A flows. When they are connected in parallel across the same battery, 6.3A flows. What is the smaller resistor's value?

  4. Circuits 2

    An inductive coil with a resistance R and Inductance L is connected in parallel with a 30ohm resistor. The combination is then connected across a 60hz ac source. If the currents in the coil, resistor and the total are 6,4 and 8A

  1. Physics

    A battery has an unknown e.m.f, ε,and an internal resistance r = 0.40Ω. When a resistance R = 5.60Ω is connected across the terminals of the battery, the terminal potential difference across the battery is 11.2V. What is the

  2. Science need help ASAP!

    The closer together magnetic field lines are, the _____ the magnetic force. closer farther stronger weaker Magnetic poles always exist in north-south poles. true*** false A(n) _____ is an electric circuit that produces a magnetic

  3. AP PHYSICS

    A 3.0-uF capacitor and a 4.0-uF capacitor are connected in series across a 40.0-V battery. A 10.0-uF capacitor is also connected directly across the battery terminals. Find the total charge that the battery delivers to the

  4. Science

    When 2 resistors, R1 and R2 are connected in series across a 6V battery the potential difference across R1 is 4V. When R1 and R2 are connected in parallel to the same battery the current through R2 is 0.45 A. Find the values of R1

  1. Physics / ICP

    1. The strength of an electromagnet depends on several factors, including the number of coils wrapped around the core of the electromagnet and the voltage of the power source. The greater the number of coils, the stronger the

  2. physics

    Consider a battery that has Vt = 12.0 V when it is not connected to a circuit. When a 10.0- resistor is connected with the battery, the potential difference across the battery’s terminals drops to 10.9 V. What is the internal

  3. physics

    A coil takes a current of 10.0 A and dissipates 1410 W when connected to a 230 V, 50 Hz sinusoidal supply. When another coil is connected in parallel with it, the total current taken from the supply is 20.0 A at a power factor of

  4. Physics

    Two resistors have resistances R1 and R2. When the resistors are connected in series to a 12.4-V battery, the current from the battery is 2.13 A. When the resistors are connected in parallel to the battery, the total current from

You can view more similar questions or ask a new question.