Physics

A construction worker is standing in a 2.6 m deep well, 3.1 m from the side of the well's wall. He tosses a hammer to a companion outside the well. If the hammer leaves his hand 1.0 m above the bottom of the well, at an angle of 35 degrees to the horizontal, what is the minimum speed it must have to clear the edge of the well? How far from the edge of the well does it land?

  1. 👍 0
  2. 👎 0
  3. 👁 60
  1. klk 54788221

    1. 👍 0
    2. 👎 0
    posted by jkhk

Respond to this Question

First Name

Your Response

Similar Questions

  1. math

    A construction worker on the roof of a 17 meter building in NYC is speaking to his boss on the ground. If the boss is standing 9 meters from the building, from the angle of depression from the construction worker to his boss. I

    asked by B8 on March 3, 2014
  2. physics

    A kg construction worker is standing on an 18.0 kg plank. The plank is m long and it is suspended by vertical cables at each end. If the worker stands 2.80 from the right end of the plank, what is the tension in right cable? Give

    asked by Idali on March 17, 2017
  3. science

    A construction worker is using his weight to keep a stationary stack of wooden beams from falling. If the construction worker uses 689.0 N of force to hold 10 beams stationary against a wall, how much work does he do? (1 point) 0

    asked by Oscar on March 7, 2015
  4. Science

    A construction worker is using his weight to keep a stationary stack of wooden beams from falling. If the construction worker uses 689.0 N of force to hold 10 beams stationary against a wall, how much work does he do?  A. 0 J B.

    asked by Anonymous on January 8, 2019
  5. physics

    A cable is lifting a construction worker and a crate, as the drawing shows. The weights of the worker and crate are 833 N and 1380 N, respectively. The acceleration of the cable is 0.620 m/s2, upward. What is the tension in the

    asked by tcc on July 25, 2013
  6. general physics

    A cable is lifting a construction worker and a crate, as the drawing shows. The weights of the worker and crate are 833 N and 1380 N, respectively. The acceleration of the cable is 0.620 m/s2, upward. What is the tension in the

    asked by ODU on July 22, 2013
  7. physics

    A cable is lifting a construction worker and a crate The weights of the worker and crate are 915 and 1430 N, respectively. The acceleration of the cable is 0.620 m/s2, upward. what is the tension in the cable below the worker?

    asked by hy on December 4, 2010
  8. PHY-102

    A construction worker on a high-rise building is on a platform suspended between two cables as illustrated below. The construction worker weighs 850 N, the plank weighs 450 N, and the tension in the left cable is 550 N. a. What is

    asked by Peggy on February 11, 2016
  9. Math

    a wrench is dropped by a worker at a construction site. four seconds later the worker hears it hit the ground below. How high is the worker above the ground? (The velocity of sound is 1100 ft/s, and the distance the wrench falls

    asked by John on November 2, 2015
  10. physics

    A cable is lifting a construction worker and a crate, as the drawing shows. The weights of the worker and crate are 930 and 1640 N, respectively. The acceleration of the cable is 0.620 m/s2, upward. (a) What is the tension in the

    asked by tiffany on February 15, 2010

More Similar Questions