physics

100turns of insulated wire are wraped around a wooden cylindrical core of cross-sectional area 12cm2. The two ends of the wire are connected to a resistor. The total circuit resistance is 13Ω. If an externally applied uniform magnetic field along the core changes from 1.6T in one direction to 1.6T in the opposite direction, how much charge in Coulombs flows through the circuit during the change?

  1. 👍 0
  2. 👎 0
  3. 👁 185

Respond to this Question

First Name

Your Response

Similar Questions

  1. physics

    Consider two copper wires with the same cross-sectional area. Wire A is twice as long as wire B. How do the resistivities and resistances of the two wires compare? CHECK ALL THAT APPLY Wire A and wire B have the same resistance.

  2. physics

    The filament in an incandescent light bulb is made from tungsten (resistivity 5.6 x 10-8 Ù·m). The light bulb is plugged into a 120-V outlet and draws a current of 2.36 A. If the radius of the tungsten wire is 0.00464 mm, how

  3. physics

    The intake in the figure has cross-sectional area of 0.75 m2 and water flow at 0.41 m/s. At the outlet, distance D = 180 m below the intake, the cross-sectional area is smaller than at the intake and the water flows out at 9.6

  4. Physical Education

    Suppose that blood flows through the aorta with a speed of 0.35 m/s. The cross-sectional area of the aorta is 2.0x10-4 m2. (a) Find the volume flow rate of the blood (b) The aorta branches into tens of thousands of capillaries

  1. physics

    A 4.0-m-long steel wire has a cross-sectional area of 0.050cm2. Its proportional limit has a value of 0.0016 times its Young's modulus. Its breaking stress has a value of 0.0065 times its Young's modulus. The wire is fastened at

  2. math

    a conductor having a cross sectional area of 0.00161 sq. in. carries a current of 4.5 amp. Calculate the electron velocity, assuming the wire to be a copper.

  3. Electrical

    a conductor having a cross-sectional area of 0.00161 sq.in. carries a current of 4.5amp. calculate the electron velocity, assuming the wire to be (a) copper, (b) aluminum.

  4. physics

    If the current in a wire of a CD player is 5.00 mA, how long would it take for 2.00 C of charge to pass through a cross-sectional area of this wire?

  1. Physics

    If a wire has a resistance, 1.32ohms,the length of 110cm,and an area of cross sectional of 0.00415cm,find the resistivity of the material of which it is made?

  2. Physics!! Help!!!!!

    A wire of length L and cross-sectional area A has resistance R. What will be the resistance R_stretched of the wire if it is stretched to twice its original length? Assume that the density and resistivity of the material do not

  3. physics

    The elastic potential energy E is given by E=C p^2 g^2 A l0^3,where p is the density of the metal.g is the acceleration of free fall. A is the cross-sectional area of the wire and C is a constant. determine the si base units of C?

  4. physics

    If a metal wire carries a current of 130 mA, how long does it take for 3.50×10 20 electrons to pass a given cross-sectional area anywhere along the wire? The magnitude of the charge on an electron is 1.6 × 10 −19 C. Answer in

You can view more similar questions or ask a new question.