chemistry

A solution is made by dilution 400.mL of 2.0 M HCL to a final volume of 1000. mL. what is the pH of this solution? i'm stuck on this question i have no idea what to do, can anyone help? thanks:)

  1. 👍 0
  2. 👎 0
  3. 👁 109
asked by Miley
  1. The easy way to do this problem is:
    Starting with 2.0 M, you dilute it from 400 to 1000 mL; therefore, the final concentration is no other than
    2.0 x (400/1000) = 0.80 M

    The harder way, but the one you've been taught to rely on, ALWAYS, is to use mols (because everything works in mols in chemistry).
    How many mols do you have to start with? That is mols = M x L = 2.0 x 0.400 =0.80 mols.
    How many mols will you have after it is diluted? Of course, you will have 0.80 mols.
    What is the concentration now in mols/L (which of course is molarity) = 0.80/1.0 L = 0.80 mol/L = 0.8 M.

    1. 👍 0
    2. 👎 0

Respond to this Question

First Name

Your Response

Similar Questions

  1. Chemistry

    Prepare a 0.0200 mM dye solution at low pH by dilution 0.40 ml of the stock 0.100 mM chemical X into the appropriate volume of 2.5 M HCl. What is the amount of HCL required for dilution, the final concentration of HCl in the

    asked by Emma on June 24, 2010
  2. Chemistry HW!!!

    1. If I dilute 75 mL of 0.50 M CaF2 solution to a final volume of 375 mL, what will be the molarity of the resulting solution? 2. What will be the final volume of the solution be if I start with a 250 mL of 1.38 M MgCl2 solution

    asked by Theresa on March 11, 2015
  3. Chemistry

    7.0 ml of 6.0 M NaOH are diluted with water to a volume of 400 ml. You are asked to find the molarity of the resulting solution. The total number of moles of NaOH is not changed on dilution. Calulate the molarity. Work:

    asked by Anonymous on April 19, 2007
  4. chemistry

    a student was asked to prepare 100.0 mL of 0.0200 M solution of HCL from 0.400 M solution of HCL. in order to do this he measured 5.0 mL of 0.400 M HCL with a graduated cylinder, transfered this amount to a 100 mL beaker, added 95

    asked by morgan on November 12, 2013
  5. Chemistry

    what volume, in L, of a 10.0M HCL solution is needed to make 2.00L of 2.00m HCL solution by dilution with water. Thank you

    asked by kate- Please help on September 1, 2012
  6. Chemistry

    Determine the pH of a solution made by diluting 25mL of 6.0 M HCl until the final volume of the solution is 1.75 L

    asked by Dylan on April 21, 2016
  7. Chemistry

    A solution is prepared using 15.0 mL of 1.0 M HCl and 20.0 mL of 0.5 M HNO3. The final volume of the solution is 1.25 L. What are the [H3O+] and [OH-] in the final solution? What is the pH of the final solution? Ok. I got 0.015

    asked by Heather on May 22, 2010
  8. Chemistry

    a solution is prepared using .015 L of 1.0 M HCl and .020 L of .50 M HNO3. the final volume of the solution is 1.25 L. Answer th following questions. a)what are the [H3O+] and [OH-] in the final solution? b)What is the pH of the

    asked by Alexa on May 4, 2010
  9. Chemistry

    What is the concentration of a solution made by diluting 95 mL of 6.0 M HCl to a final volume of 750 mL

    asked by Tish on October 14, 2012
  10. Biology

    You have a stock solution of 100mg/100ml methylene blue and you need 6.0 ml of final solution at 2mg/100ml. Design a serial dilution using volumes between 0.1 and 10 ml. Final volume must be 6ml.

    asked by Anonymous on January 19, 2015

More Similar Questions