Circuits 2
posted by Student .
A coil of 50 ohm resistance and of 150mH inductance is connected in parallel with a capacitor 50microF. The source voltage is 100 sin(wt+30). What is the equation line current.
Respond to this Question
Similar Questions

Physics
Thanks for any help :) Four 20 ohm resistors are connected in parallel and the combination is connected to a 20V emf device. The current is: A) 0.25A B) 1.0 A C) 4.0 A D) 5.0 A E) 100 E Parallel circuits: I know that the voltage is … 
physics.
resistors of 30 ohms and 60 ohms are connected in parallel and joined in series to a 10 ohm resistor. the circuit voltage is 180 volts I need to find 1)the voltage of the parallel circuit 2)the resistance of the complete circuit 3)the … 
physics
resistors of 30 ohms and 60 ohms are connected in parallel and joined in series to a 10 ohm resistor. the circuit voltage is 180 volts I need to find 1)the voltage of the parallel circuit 2)the resistance of the complete circuit 3)the … 
physics
resistors of 30 ohms and 60 ohms are connected in parallel and joined in series to a 10 ohm resistor. the circuit voltage is 180 volts I need to find 1)the voltage of the parallel circuit 2)the resistance of the complete circuit 3)the … 
Physics
A solenoid has N=1760.0 turns, length d=40 cm , and radius b=0.4 cm, (b<<d) . The solenoid is connected via a switch, S1 , to an ideal voltage source with electromotive force ϵ=7 V and a resistor with resistance R=25 Ohm … 
Physics
A solenoid has N=1760.0 turns, length d=40 cm , and radius b=0.4 cm, (b<<d) . The solenoid is connected via a switch, S1 , to an ideal voltage source with electromotive force ϵ=7 V and a resistor with resistance R=25 Ohm … 
Physics
A solenoid has N=1568.0 turns, length d=32 cm , and radius b=0.2 cm, (b<<d) . The solenoid is connected via a switch, S1 , to an ideal voltage source with electromotive force ϵ=13 V and a resistor with resistance R=25 Ohm … 
science past year
1.1. A resitance of 1.5ohm is connected in parallel with a resistance of 3 ohm. This combination is connected in series with a resistance of unknown resistance of value R. The circuit is then connected acress a 10 V supply. Calculate: … 
circuits 2
a 25ohm resistor connected in series with a coil of 500ohm resistance and 150mH inductance. What is the power factor of the circuit? 
Circuits 2
An inductive coil with a resistance R and Inductance L is connected in parallel with a 30ohm resistor. The combination is then connected across a 60hz ac source. If the currents in the coil, resistor and the total are 6,4 and 8A respectively. …