posted by .

A force of 40N is applied at the end of a wire 4m long and it produces an extension of 0.24mm.if the diameter of the wire is 2.0mm.calculate the stress and strain of the wire

  • physics -


Respond to this Question

First Name

School Subject

Your Answer

Similar Questions

  1. physics

    A circular steel wire 2.00 m is to stretch no more than 0.25 cm when a tensile force of 400 N is applied to each end of wire. What minimum diameter is required for the wire?
  2. Physics

    A weight of 40N was attached to the end of a wire during modulus experiment, if the length of the wire is 4m and the diameter is 0.44mm and the extension recorded is 0.30mm. calculate the stress and strain of the wire?
  3. physics

    Find the diameter of an 18 m(L) long steel wire that will stretch no more than.009 m AL when a load stress of 3800 N is hung on the end of the wire. The Young's Modulus for steel wire is 200 x 109 N/m2?
  4. Physics

    1.A brass wire 80 cm long and 0.3 cm in diameter is used to hang an object weighing 6.5 x 10 ^5 dynes. Find stress, strain and young's modules. 2. To one end of a wire 1.2 m long and 0.4 cm in diameter is hung on object with a mass …
  5. Physics

    a wire 100 cm long and 0.2 cm in diameter is suspended from a support. a 10 kg mass is hung from the lower end of the wire. a find the stress b find the strain c young's modulus of elasticity
  6. physics

    . A copper wire 1.00 mm in diameter is used to support a mass of 6.0 kg. If the wire was stretched by 2.00 mm, what was the original length of the wire?
  7. Physics

    A wire of length 5.0 m and diameter 2.0 mm extends by 0.25 mm when a force of 50 N was used to stretch it from its end. Calculate the (a)stress on the wire (b)strain in the wire
  8. Physics

    Please how do i get an answer to this answer that goes like this a wire of length 5.0m and diameter 2.0cm extends by 0.25mm when a force of 50n was used on its end. Calculate (i) stress (ii) strain in the wire (pi=3.142)

    A FORCE OF 40N IS Applied at the end of wire 4m long and produced an extention of 0.24mm if the diameter of wire is 2.00mm.calculate stress on wire and strain in the wire
  10. physics

    A long straight vertical wire of diameter 2.0mm carries a steady current upwards. At 30mm from the centre of the wire, the magnetic field strength is 0.10mT. Sketch a graph to show the variation of magnetic field strength from the …

More Similar Questions