Draw a circuit diagram of a containing two cells in series, a closed switch, three identical light bulbs in parallel.

A closed circuit with a two cell battery and three lamps in series.

Hi guys

Just draw a circuit in Parallel and label it

Draw

To draw a circuit diagram with two cells in series, a closed switch, and three identical light bulbs in parallel, follow these steps:

1. Start by drawing a straight line on a piece of paper or a digital drawing tool. This line will represent the electrical path or the wire in the circuit.

2. At one end of the line, draw a small vertical line pointing upwards. This vertical line represents the positive terminal of the first cell.

3. Draw a longer horizontal line starting from the top end of the vertical line. This horizontal line represents the wire connecting the positive terminal of the first cell to the negative terminal of the second cell.

4. Draw a second vertical line pointing downwards at the end of the horizontal line. This vertical line represents the negative terminal of the second cell.

5. Draw a horizontal line starting from the bottom end of the second vertical line. This horizontal line represents the wire connecting the negative terminal of the second cell to the switch's pole.

6. Draw a small vertical line pointing downwards at the end of the horizontal line from step 5. This vertical line represents the switch's pole.

7. Draw two short horizontal lines from the bottom of the switch's pole, one to the left and one to the right. These lines represent the wires connecting the switch's pole to each of the three light bulbs.

8. Draw three vertical lines, one each from the end of the horizontal lines from step 7. These vertical lines represent the connections to the light bulbs.

9. Finally, draw short horizontal lines from the bottom end of each of these three vertical lines and label them as the positive terminals of the light bulbs.

10. At the bottom of the circuit diagram, draw a horizontal line connecting all these positive terminals of the light bulbs, representing the wire connecting them in parallel.

Your circuit diagram should now show two cells in series, a closed switch, and three identical light bulbs in parallel.

Remember to use symbols for each component (e.g., a zigzag line for a resistor, a straight line for a wire, and an open or closed loop for a switch) to make the circuit diagram clear and easy to understand.

ok

now what?