Post a New Question

physics

posted by .

When subjected to a force of compression, the length of a bone (compression Young's modulus 9.4 x 109 N/m2, tensile Young's modulus 1.6 x 1010 N/m2) decreases by 1.5 x 10-5 m. When this same bone is subjected to a tensile force of the same magnitude, by how much does it stretch?

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Physics hard...

    Young's Modulus (Y) 20 X 1010 N/m2 Shear Modulus (S) 8.1 X 1010 N/m2 Bulk Modulus (B) 16 X 1010 N/m2 The table to the above represents various properties of steel. You have steel wire 4.9 meters in length that stretches 0.16 cm when …
  2. physics

    The maximum applied force of compression that one man’s thighbone can endure without breaking is 7.6 x104 N. The minimum effective cross-sectional area of the bone is 3 x10-4 m2, its length is 0.54 m, and Young’s modulus is Y=9.4x109 …
  3. mechanics of materials

    4. A metal bar with a cross-sectional area of 50mm2 is subjected to a tensile strain of 0.001. What is the tensile force responsible for the strain given that the material has a Young's modulus of 15GNm raise to the power -2 A 0.003N …
  4. mechanics

    A metal bar with a cross-sectional area of 50mm2 is subjected to a tensile strain of 0.001. What is the tensile force responsible for the strain given that the material has a Young's modulus of 15GNm raise to the power -2 A 0.003N …
  5. Physics : Young's Modulus

    A mass m is attached to a weightless string of length L, cross section S, and tensile strength ( the maximum tension it can withstand ) T . The mass is suddenly released from a point near the fixed end of the string. What condition …
  6. physic

    Depending on how you fall, you can break a bone easily. The severity of the break depends on how much energy the bone absorbs in the accident, and to evaluate this let us treat the bone as an ideal spring. The maximum applied force …
  7. Physics

    When subjected to a force of compression, the length of a bone (compression Young's modulus 9.4 x 109 N/m2, tensile Young's modulus 1.6 x 1010 N/m2) decreases by 1.5 x 10-5 m. When this same bone is subjected to a tensile force of …
  8. Material Sciences

    The molar crosslink density of a rubber is measured to be 468mol/m3 for a temperature T=300K. What is the Young's modulus of the rubber in MPa?
  9. physics

    A copper (Young's modulus 1.1 x 1011 N/m2) cylinder and a brass (Young's modulus 9.0 x 1010 N/m2) cylinder are stacked end to end, as in the drawing. Each cylinder has a radius of 0.14 cm. A compressive force of F = 4800 N is applied …
  10. physics

    A copper (Young's modulus 1.1 x 1011 N/m2) cylinder and a brass (Young's modulus 9.0 x 1010 N/m2) cylinder are stacked end to end, as in the drawing. Each cylinder has a radius of 0.38 cm. A compressive force of F = 6100 N is applied …

More Similar Questions

Post a New Question