# physics

posted by .

If a wire has a resistance of 132ohms a length of 110cm and an area of cross- sectional of 0.00415cm square find the resistivity of the material of which it is made

• physics -

4 5 6

## Similar Questions

1. ### physics

Two wires have the same cross-sectional area and are joined end to end to form a single wire. The first wire has a temperature coefficient of resistivity of α1 =0.00480 (C°)-1 and a resistivity of 4.90 x 10-5Ω m. For the …
2. ### physics

German silver wire has a cross-sectional area of 2.047 x 10^-3 cm^2. How many meters are needed to make a resistance of 100 (omega)?
3. ### College Physics

A wire P has resistance R. If the wire is stretched and its length is increased by 10%, what would be the percentage change in its resistance?
4. ### Physics!! Help!!!!!

A wire of length L and cross-sectional area A has resistance R. What will be the resistance R_stretched of the wire if it is stretched to twice its original length?
5. ### Physics

A 100 m long wire with a cross-sectional area of 4 mm2 has a resistance of 6 ohms. What is the resistivity of the material of the wire in Ùm?
6. ### PHYSICS

Two wires have the same cross-sectional area and are joined end to end to form a single wire. The first wire has a temperature coefficient of resistivity of α1 =0.00603 (C°)-1 and a resistivity of 5.00 x 10-7Ω m. For the …
7. ### Physics

A wire of cross-sectional area 5.00x10^-6 m^2 has a resistance of 1.75 ohm. what is the resistance of a wire of the same material and length as the first wire, but with a cross-sectional area of 8.75x10^-6 m^2?
8. ### physics

Consider two copper wires with the same cross-sectional area. Wire A is twice as long as wire B. How do the resistivities and resistances of the two wires compare?
9. ### Physics

The filament in an incandescent light bulb is made from tungsten (resistivity 5.6 x 10-8 Ù·m). The light bulb is plugged into a 120-V outlet and draws a current of 2.36 A. If the radius of the tungsten wire is 0.00464 mm, how long …
10. ### Physics

A material is formed into a long rod with a square cross section 0.31 cm on each side. When a 100 V voltage is applied across a 16 m length of the rod, a 4.6 A current is carried. What is the resistivity of the material?

More Similar Questions