# Math

posted by .

A rectangular piece of metal with 4 equally sized circular holes have a diameter of 12 cm cut from it. Calculate the area of metal after the holes have been cut out

4060.88cm ??

• Math -

besides the muddled English, you give no indication of the size of the sheet.

## Similar Questions

1. ### Math

A piece of rectangular metal has 8 holes punched in it that lie in a straight line.If there are 1 1/16 inches between the centers of two consecutive holes find the distance from the center of the first hole to the center of the last …
2. ### Math

Twelve equally spaced holes are to be drilled in a 34 1/4 inch metal strip, after 2 inches are cut off on each end. What is the distance, to the nearest hundredth of an inch, from center to center of 2 consecutive holes?
3. ### math

A rectangular sheet of metal, of area 440 sq.cm is folded into a cylinder, to enclose a volume of 1540 cu.cm. A circle whose diameter is equal to the width of the rectangular sheet is cut from the sheet. Find the ratio of the area …
4. ### Math

Rectangular plate is 6m wide and 12m long two holes of 2diameter have been gay cut in plate calculate the are of remaining plat?
5. ### math

A circular piece of sheet metal has a diameter of 20 in. The edges are to be cut off to form a rectangle of area 160in^2. What are the dimensions of the rectangle?
6. ### Maths

A rectangualr metal sheet is 32m long, 16m wide and 12mm thick. Eight circular holes, each of diameter 3m are cut in the sheet, so that none of the holes overlap. Calculate the volume of metal remaining, correct to 3 decimal places …
7. ### maths

from a rectangular piece of metal sheet of length and breadth 1.60 m and 80 cm respectively, 3 circular sheets of 20 cm radius are cut out. what area of metal is left?
8. ### Math

A rectangular piece of metal with 4 equally sized circular holes have a diameter of 12 cm cut from it. Calculate the area of metal after the holes have been cut out 339.12cm squared Rectangle formula : l x w Circle : π × r2
9. ### Algebra

One more rectangular-shaped piece of metal siding needs to be cut to cover the exterior of a pole barn. The area of the piece is 30 ft². The length is 1 less than 3 times the width. How wide should the metal piece be?
10. ### math

A rectangular and two circular cut-outs of metal sheet of negligible thickness are used to make a closed cylinder. The rectangular cut-out ha a height of 18 cm. Each circular cut-out has a radius of 5.2 cm. Calculate in terms of area …

More Similar Questions