physics
posted by hank .
A tank contains mercury, whose density is 13 600 kg/m3. Find the force exerted by the mercury on a circular plug at the bottom of the tank. The plug has a diameter of 2.54 cm, and is located 37.6 cm below the surface of the mercury.
The answer is 25.4 N but I don't know how to go through and get find this.

I really need help with this question please
Respond to this Question
Similar Questions

physics
tank of water with L=6m, W=3m, H=4m. 1) Find the force on the bottom of the tank from water. (ignore atmosphere pressure). 2) If the door to the tank is 1.5m by 1.5m and it is 2.25m (center bottom)from the edge of the tank, what is … 
pressure
ab open tube mercury manometer is used to measure the pressure in an oxygen tank. when the atmospheric pressure is 1040 mbar, what is the absolute pressure (in Pa) in the tank if the height of the mercury in the open tube is a)28 cm … 
Controls
If you have a tank of water at sea level and the temperature of the water in the tank is 110 degrees F, what is the height of the water if the pressure at the bottom of the tank is 95 inches of mercury(absolute) 
Physics
A./_\ B.\_/ C._ The three tanks shown above are filled with water to an equal depth. All the tanks have an equal height. Tank A has the greatest surface area at the bottom, tank B the least and tank C the middle. (Select TTrue, … 
Re post water in tanks problem
A./_\ B.\_/ C._ The three tanks shown above are filled with water to an equal depth. All the tanks have an equal height. Tank A has the greatest surface area at the bottom, tank B the least and tank C the middle. (Select TTrue, … 
physics
A clear plastic tube with a diameter of 12cm and 110cm high is filled to the top with mercury. (density = 13.6 kg/m^3). There are three holes, all with a radius of 2 millimeters located 15cm from the bottom, 50cm from the bottom and … 
general physics
A tank contains mercury, whose density is 13 600 kg/m3. Find the force exerted by the mercury on a circular plug at the bottom of the tank. The plug has a diameter of 2.54 cm, and is located 37.6 cm below the surface of the mercury. 
Physics
1. What is the pressure on the bottom of an aquarium 0.30 m deep filled with water? 
fisics
a storage tank containing H2O is connected to an output of 6 ft in diameter. a circular plug is used to seal the tank. dtermine the address and location of the force on the cap scale h2o 
Physical
Determine the pressure at bottom of an open tank if it contains layers 10 cm of oil, 30 cm of water and 5cm of mercury. Given that the densities of oil, water, and mercury are 850 kg/m^3, 1000kg/m^3 and 13600kg/m^3 respectively.