college trig

posted by .

find the radius of a pulley if rotating the pulley 108.03 degrees raises the pulley 37.3mm

  • college trig -

    arc/circumference = angle/360°

    37.3/2πr = 108.03/360
    2πr(108.03) = 37.3(360)
    r = 19.783 mm

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Physics, please help me today.

    four pulleys are connected by two belts. Pulley A (radius 15cm) is the drive pulley and it rotates at 10 rad/s. Pulley B (radius 10 cm) is connected by belt 1 to pulley A. Pulley B' (radius 5cm) is concentric with pulley B and is rigidly …
  2. physics

    A block (mass = 2.9 kg) is hanging from a massless cord that is wrapped around a pulley (moment of inertia = 1.2 x 10-3 kg·m2), as the figure shows. Initially the pulley is prevented from rotating and the block is stationary. Then, …
  3. physics

    Two masses are suspended from a pulley as shown in the figure below (the Atwood machine). The pulley itself has a mass of 0.20 kg, a radius of 0.15 m, and a constant torque of 0.35 m·N due to the friction between the rotating pulley …
  4. math (Calculus)

    A circular pulley with a radius of 10 cm is turning at 12 revolutions per minute. How fast is a point on the edge of the pulley rising when it is 5 cm higher than the center of the pulley?
  5. Help Math

    A circular pulley with a radius of 10 cm is turning at 12 revolutions per minute. How fast is a point on the edge of the pulley rising when it is 5 cm higher than the center of the pulley?
  6. Physic

    A block (mass 2.4 kg) is hanging from a massless cord that is wrapped around a pulley -3 2 (moment of inertia of the pulley = 1.3 x 10 kg·m ), as the drawing shows. Initially the pulley is prevented from rotating and the block is …
  7. Maths

    The pulley in the jib of a crane has a diameter of 56cm. Find: a) The circumference of the pulley b) The number of revolutions turned by the pulley when the crane raises a load through a vertical height of 44m.
  8. Physics

    A light string is attached to both a hanging mass m1 = 5 kg and to a pulley of mass m2= 6 kg, and radius R = 0.75 m. If the pulley is a solid disc rotating about its center with a moment of inertia of I = 0.5*m2R2, and the string does …
  9. Physics

    When the motor in the figure below raises the m = 1010kg mass, it produces a tension of 1.04E+4N in the cable on the right side of the pulley. The pulley has a moment of inertia of 78.9kgm^2 and a radius of 0.736m. The cable rides …
  10. physics

    Consider the system shown in the diagram. The pulley is a uniform cylinder with mass m3 = 0.60 kg and radius R = 4.0 cm, the other two masses are m1 = 2.5 kg and m2 = 1.0 kg, and á = 30o. Assume the rope is massless, there is no slipping …

More Similar Questions