math

posted by .

Assuming that a table saw blade has a diameter of 12 inches and spins at 3450 revolutions per minute (RPMs),determine how fast the tip of the teeth of the saw blade are traveling in miles per hour.

  • math -

    3450/12= 287.5 RPMs
    287.5 min/60 mins = 1 hr
    =4.8 RPHR

    is that right then?

  • math -

    Please only post your questions once. Repeating posts will not get a quicker response. In addition, it wastes our time looking over reposts that have already been answered in another post. Thank you.

    See your later post.

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. physics

    An electric saw uses a circular spinning blade to slice through wood. When you start the saw, the motor needs 6 seconds of constant angular acceleration to bring the blade to its full angular velocity. If you change the blade so that …
  2. Trig Circular Motion

    A es004-1.jpginch circular saw blade rotates at 5200 revolutions per minute. a) Find the angular speed of the saw blade in radians per minute. b) Find the linear speed in feet per minute of one of the 24 cutting teeth as they contact …
  3. Trig

    A 7.25 inch circular saw blade rotates at 5200 revolutions per minute. a) Find the angular speed of the saw blade in radians per minute. b) Find the linear speed in feet per minute of one of the 24 cutting teeth as they contact the …
  4. TRIG

    A circular power saw has an 8-1/2 inch diameter blade that rotates at 4400 revolutions per minute. a)Find the angular speed of the saw blade in radians per minute. b)Find the linear speed in feet per minute of one of the 24 cutting …
  5. physics

    A helicopter blade spins at 110 revolutions per minute. Its tip is 5.50 m from the center of rotation.
  6. math

    Assuming that a table saw blade has a diameter of 12 inches and spins at 3450 revolutions per minute (RPMs), use the unit conversion techniques you have learned from the material in 2-A to determine how fast the tip of the teeth of …
  7. math

    Assuming that a table saw blade has a diameter of 12 inches and spins at 3450 revolutions per minute (RPMs),determine how fast the tip of the teeth of the saw blade are traveling in miles per hour. Answer: 3450/12= 287.5 RPMs 287.5 …
  8. math

    a radial arm saw has a circular cutting blade with a diameter of 10 inches. it spins at 200 rpm. what is the linear speed of one of the 12 cutting teeth on a blade?
  9. trig

    A car is traveling at 34 miles per hour. If its tires have a diameter of 14 inches, how fast are the car’s tires turning?
  10. trig

    A car is traveling at 34 miles per hour. If its tires have a diameter of 14 inches, how fast are the car’s tires turning?

More Similar Questions