science
posted by Anonymous .
A linear circuit is shown below in Figure 1.
Figure 1
The elements in this circuit have the following values: R1=100Ω, R2=200Ω, R3=350Ω, V=5V, and I=0.004A.
Determine the potentials drops vA and vB across resistors R1 and R2 respectively.
What is the value of voltage vA in Volts?
incorrect
What is the value of voltage vB in Volts?
incorrect
Now let us determine if the answers you came up with satisfy the laws of physics.
What is the power (in Watts) dissipated in resistor R1?
incorrect
What is the power (in Watts) dissipated in resistor R2?
incorrect
What is the power (in Watts) dissipated in resistor R3?
incorrect
What is the power (in Watts) coming out of the voltage source V?
incorrect
What is the power (in Watts) coming out of the current source I?

How are the resistors connected?
Respond to this Question
Similar Questions

Physics
Three resistors (14.4 Ω, 21.7 Ω, 14.1 Ω) are connected in parallel across 98 V. What is the total resistance for this circuit? 
physics
the ﬁgure is 4.00 W. E 3.0 Ω 15.0 Ω 5.0 Ω 4.3 Ω 3.0 Ω Find the equivalent resistance of the circuit. Answer in units of Ω 
physics
Consider the following circuit. 7.3 Ω 3.0 Ω 3.0 Ω 4.5 Ω 1.0 Ω 3.0 Ω 4.5 Ω 19.0 Ω 19.0 Ω 30 V Find the equivalent resistance. Answer in units of Ω 
Physics
Four resistors 2.1Ω, 3.2 Ω, 4.3 Ω, and 5.4 Ω are connected in a series to a 9 V battery. The effective resistance in the circuit is: 
Calculus 1
If two resistors with resistances R1 and R2 are connected in parallel, as in the figure below, then the total resistance R, measured in ohms (Ω), is given by 1/R= 1/R1+ 1/R2. If R1 and R2 are increasing at rates of 0.3 Ω/s … 
Calculus 1
If two resistors with resistances R1 and R2 are connected in parallel, as in the figure below, then the total resistance R, measured in ohms (Ω), is given by 1/R= 1/R1+ 1/R2. If R1 and R2 are increasing at rates of 0.3 Ω/s … 
Calculus
If two resistors with resistances R1 and R2 are connected in parallel, as in the figure, then the total resistance R, measured in Ohms (Ω), is given by: 1/R=1/R1+1/R2 If R1 and R2 are increasing at rates of .3Ω/s and .2Ω/s, … 
Electronics, Physics, Math
5. A circuit is supplied with 30 VDC and contains three resistors connected in series. The value or R1 is 80Ω, the value of R2 is 1,000Ω , and the value of R3 is 4,200Ω . What is the voltage drop across R2? 
COLLEGE CALCULUS HELP
If two resistors with resistances R1 and R2 are connected in parallel, as in the figure below, then the total resistance R, measured in ohms (Ω), is given by 1 R = 1 R1 + 1 R2 . If R1 and R2 are increasing at rates of 0.3 Ω/s … 
CALCULUS TEST TOMORROW
If two resistors with resistances R1 and R2 are connected in parallel, as in the figure below, then the total resistance R, measured in ohms (Ω), is given by 1 R = 1 R1 + 1 R2 . If R1 and R2 are increasing at rates of 0.3 Ω/s …