chemistry

posted by .

the youngs modulus for the steel is 20.7*10^10 N/m2,how much will a 2.5 mm diameter wire 12 cm long, be strained when it support a load of 450 N?
express strain as decimal not a %

  • chemistry -

    4.436e-4

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. physics

    A light rigid bar is suspended horizontally from two vertical wires, one of steel and one of brass. Each wire is 2.00m long. The diameter of the steel wire is 0.60mm and the length of the bar AB is 0.20m. When a mass of 10.0kg is suspended …
  2. physics

    A light rigid bar is suspended horizontally from two vertical wires, one of steel and one of brass. Each wire is 2.00m long. The diameter of the steel wire is 0.60mm and the length of the bar AB is 0.20m. When a mass of 10.0kg is suspended …
  3. Physics

    A 2.2m of steel wire hangs vertically down from a support. A 1.5m length of brass wire of the same diameter is attached to the lower end of the steel wire.when a 10 kg mass is attached to the lower end of the brass wire a total extension …
  4. mechanics

    The change in length of a steel wire under an applied load can be halved by keeping all other conditions constant but using: A. a different material having a Young's modulus half that of steel B half the cross sectional area of the …
  5. chemistry

    The Young’s modulus for steel is 20.7*1010 N/m2. How much will a 2.5 mm diameter wire 12 cm long, be strained when it supports a load of 450 N?
  6. Physics

    A copper wire of diameter 0.30mm and length 1.50m is joined to another steel wire of same diameter and length 1.20m. The copper part of the double wire is hung vertically to a fixed point, while a small weight is connected to the lower …
  7. physics

    Find the diameter of an 18 m(L) long steel wire that will stretch no more than.009 m AL when a load stress of 3800 N is hung on the end of the wire. The Young's Modulus for steel wire is 200 x 109 N/m2?
  8. physics

    A strip of rubber originally 75 mm long is stretched until it is 100 mm long. a.What is the tensile strain b.Why has the answer no units?
  9. physics

    A 4.0-m-long steel wire has a cross-sectional area of 0.050cm2. Its proportional limit has a value of 0.0016 times its Young's modulus. Its breaking stress has a value of 0.0065 times its Young's modulus. The wire is fastened at its …
  10. Physics

    a wire 100 cm long and 0.2 cm in diameter is suspended from a support. a 10 kg mass is hung from the lower end of the wire. a find the stress b find the strain c young's modulus of elasticity

More Similar Questions