# science

posted by .

A hydraulic jack is needed to raise an object with a force of 4000 N to a height of 3 metres above the ground. Will the jack do the job? (Answer after working through the rest of the question.

## Similar Questions

1. ### Physics

A jack exerts a vertical force of 4.5 x 10^ 3 newtons to raise a car 0.25 meter. How much work is done by the jack?
2. ### science

A force of 625 N is applied to a hydraulic jack piston that is 0.04 m in diameter. If the piston which supports the load has a diameter of 0.60 m, how much mass can be lifted by the jack?
3. ### Math

Jack decides to ride the ferris wheel. He board at 1m and is the last person on the ride. The diameter of the wheel is 16m and it takes 8sec for one complete revolution. Find the equation that represents Jack's height in relation to …
4. ### Physics

Could a simple machine such as a lever, a pulley system or a hydraulic jack be considered a heat engine?
5. ### Physics

Could a simple machine such as a lever, a pulley system or a hydraulic jack be considered a heat engine?
6. ### reposting english correction

Hi, Writeacher this is my reposting from the Jack and the Beanstalk story. #1- Well in the beginning of the of the story he was a caring good boy. So, he was a good character. The only bad thing he did was stealing from the ogre. #2- …
7. ### PHYSICS

You are using a hydraulic jack to lift a 12000 Newton object. This input piston of your jack has a radius of 0.85 meters and you can exert a maximum of 3500 Newtons on it. How large does the radius of the output piston need to be in …
8. ### Physics

the input and output of hydraulic jack are respectively 1 cm and 4 cm in diameter. A lever with a mechanical advantage of 6 is used to apply force to the input piston. How much mass can the jack lift if a force of 180 N is applied …
9. ### english

(1) Jack had been without a car since Monday. (2) The car needed a new battery, and Jack was broke. (3) Although he was embarrassed, Jack called his mother. (4) He felt he had no choice. (5) Fortunately, his mom was happy to help out. …
10. ### math

The bottom of a ladder is on horizontal ground. The top of a ladder is leaning against a vertical wall. Diagram: right angle triangle labelled height is h metres, bottom of triangle is labelled d metres and in between the labelled …

More Similar Questions