# Physics

posted by .

What is the coeffecient of drag for the shape that has diameter 7.32[cm]? .
Use three sig. figs. or N/A if there is not enough information.

2. You have a large wind tunnel of cross-sectional area 0.95[m2]. You have a set of shapes that are all the same shape except they each have a different cross-sectional area. The wind speed is held constant at 3.2[ms-1]. Assume air density is 1 [kg m-3]. The slope of Drag versus Area for this data is 0.45. [Slope units left out purposefully by me for sake of next question.]
What is the coeffecient of drag for the shape? .
Use three sig. figs. or N/A if there is not enough information.

3. The slope from the plot of Drag versus Area in the question above has units of
[N]
[m^2]
[kgm^-3]
No units
[Nm^-2]

All three have me stumped

## Similar Questions

1. ### Physics Sig Figs

When you are multiplying two numbers, how do you determine the number of significant figures?
2. ### physics

Calculate the ratio of the drag force on a passenger jet flying with a speed of 850 km/h at an altitude of 10 km to the drag force on a prop-driven transport flying at three-fifths the speed and half the altitude of the jet. At 10 …
3. ### How many sig figs?

For this question: what is the boiling point of 0.39 mol ethylene glycol and 0.13 mol KBr in 155 g H2O?
4. ### Physics

This problem compares some energy properties of two motor vehicles: For efficient car, use drag coefficient of .21 and a cross sectional area of 1.5m^2. For a light truck, use drag coefficient of .75 and a cross sectional area of 2.7m^2. …
5. ### sig figs

I am having trouble with my sig figs Many scientific data are reported at 25°C. What is this temperature in kelvins and in degrees Fahrenheit?
6. ### physics

1. Air flowing through a vent pipe of cross-sectional area 21[m^2] is traveling 0.89[ms^-1]. What is the flowrate?
7. ### Physics

1. You have a large wind tunnel of cross-sectional area 0.61[m2]. The wind speed is 4[ms-1]. Assume air density is 1 [kgm-3]. The Drag is 2.3[N]. What is the coeffecient of drag for the shape that has diameter 7.32[cm]?
8. ### Physics (fluids)

1. You have a large wind tunnel of cross-sectional area 0.61[m2]. The wind speed is 4[ms-1]. Assume air density is 1 [kgm-3]. The Drag is 2.3[N]. What is the coeffecient of drag for the shape that has diameter 7.32[cm]?
9. ### Physics

Platform area = 0.027[m2]. Wind Speed = 7.1[ms-1]. Air Density = 1[kg m-3]. Drag = 0.39[N]. Lift = 1.45[N]. Coeffecient of Lift = Use three sig. figs. or N/A if no answer. Platform area = 0.045[m2]. Wind Speed = 5.7[ms-1]. Air Density …
10. ### Chemistry- sig figs

0.2748 Is my answer and the problem is sig figs... The question have two sig figs so would it be .27 or .28?

More Similar Questions